# Kitchen splashback installation estimate example: Perth, Western Australia PDF and itemised costs

Explore a kitchen splashback installation estimate example for Perth, Western Australia: 7 itemised AUD lines and a fictional total of A$2,404.97, with metric measurements, scope notes and an app-exported PDF.

Canonical: https://quicklyestimates.com/en-au/samples/backsplash-installation-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional kitchen splashback installation quote for Perth, Western Australia has 7 itemised lines totalling A$2,404.97. Review the exact metric quantities and scope, then open the matching app-exported PDF. The 0% tax entry is only an example input.

EXAMPLE AT A GLANCE

This fictional kitchen splashback installation quote for Perth, Western Australia has 7 itemised lines totalling A$2,404.97. Review the exact metric quantities and scope, then open the matching app-exported PDF. The 0% tax entry is only an example input.

Download the example PDF ↓ (https://quicklyestimates.com/assets/guides/backsplash-installation/en-AU/estimate.pdf)How to estimate this work → (https://quicklyestimates.com/en-au/guides/how-to-estimate-backsplash-installation/)

The 3.34 m² kitchen splashback scope

Install 3.34 m² of selected splashback tile on suitable existing walls. Allow 3.72 m² of tile for purchase, 3.34 m² for setting, 7.32 m of edge trim, power point-cut detailing, grout and cleanup. Electrical device work and wall reconstruction are excluded.

This is an original fictional job set in Perth, Western Australia. The location gives the example a recognisable setting; the rates are made-up inputs and do not describe local prices. Use the matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-backsplash-installation/) to check what should be measured, selected or excluded on a real job.

Prepared by Harbour & Gum Projects · fictional business

Prepared for Alex Morgan · fictional customer

Example location Perth, Western Australia

Issued / valid through 25 September 2026 / 25 October 2026

Itemised kitchen splashback installation example

Each amount is its quantity multiplied by its AUD unit rate, rounded to cents. These 7 entries match the fixture used to make the PDF. Metric surface and length units describe the priced work, not a conversion rule for another property.

Kitchen splashback installation example — AUD Work item | Quantity | Unit rate | Amount |

Counter and cabinet protection | 1 job | A$140.00 | A$140.00 |

Tile material allowance | 3.72 m² | A$135.75 | A$504.99 |

Setting and grout materials | 1 job | A$224.00 | A$224.00 |

Tile setting labour | 3.34 m² | A$286.50 | A$956.91 |

Exposed-edge trim | 7.32 m | A$32.25 | A$236.07 |

Power point cut detailing | 5 each | A$39.20 | A$196.00 |

Cleanup and sealant finish | 1 job | A$147.00 | A$147.00 |

Subtotal / example total | A$2,404.97 |

Calculation check: 3.72 m² × A$135.75 = A$504.99; 3.34 m² × A$286.50 = A$956.91. The demonstration tax field is 0%, so the displayed total stays A$2,404.97. Determine tax and markup for your own work instead of using this input as guidance.

Assumptions and scope boundaries

Power points and short returns affect layout work. Identify trim length and penetrations separately so a simple field-tile area does not conceal the detailed portions of the job.

Outside this example: No benchtop replacement, wall reconstruction, electrical device relocation or specialty tile pattern beyond the described selection.

Selections, access or concealed conditions that differ from this scope require a revised quantity, allowance or separate line. The example deliberately separates them so the client can see what has and has not been priced.

Open the app-exported PDF

The PDF is a completed example exported from Estimates using this job data, fictional parties and the line amounts above. Read all pages to check notes as well as the total. The preview is the first page.

(https://quicklyestimates.com/assets/guides/backsplash-installation/en-AU/estimate.pdf) Download kitchen splashback installation PDF ↓ (https://quicklyestimates.com/assets/guides/backsplash-installation/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/backsplash-installation/en-AU/estimate.pdf)

Adapt this example to your next job

- Replace the example location and project description with the actual site and client's requested result.
- Measure the work in the units shown, revising each quantity and product allowance to suit your plans and site inspection.
- Obtain your own supplier and labour inputs, then check access, protection, disposal and any specialist trade boundaries.
- Record exclusions and choices that remain open; review markup and tax for the actual quote.
- Preview every page of the PDF and check the item totals before sharing it.

- Measure each wall segment and end point.
- Record tile format and layout direction.
- Count power points and exposed edges.
- Confirm wall suitability and device responsibilities.

Common questions about kitchen splashback installation

Why buy more tile than the installed area?

Cuts and layout can require additional material. State the purchasing quantity as an example assumption and revise it for the selected tile and actual pattern.

Do power point cutouts belong in the splashback estimate?

Yes when they affect tile cutting. Distinguish tile cuts from electrical device work, which may require its own scope.

FROM SCOPE TO PDF

Make your own kitchen splashback installation estimate.

Describe the actual job in Estimates on iPhone or Android, then review every quantity, rate and scope note. Add your business and client details, check the document and share an itemised PDF. Example amounts are fictional, and some app features may require an in-app purchase.

Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the matching guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-backsplash-installation/)

Related estimating resources

- Step-by-step guide for this scope (https://quicklyestimates.com/en-au/guides/how-to-estimate-backsplash-installation/)
- Tile flooring estimate example (https://quicklyestimates.com/en-au/samples/tile-flooring-estimate/)
- How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/)

Actual app PDF: https://quicklyestimates.com/assets/guides/backsplash-installation/en-AU/estimate.pdf
Get the app: https://quicklyestimates.com/en-au/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus