# Bathroom renovation estimate example: Sydney, New South Wales PDF and itemised costs

Explore a bathroom renovation estimate example for Sydney, New South Wales: 7 itemised AUD lines and a fictional total of A$5,987.42, with metric measurements, scope notes and an app-exported PDF.

Canonical: https://quicklyestimates.com/en-au/samples/bathroom-remodel-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional bathroom renovation quote for Sydney, New South Wales has 7 itemised lines totalling A$5,987.42. Review the exact metric quantities and scope, then open the matching app-exported PDF. The 0% tax entry is only an example input.

EXAMPLE AT A GLANCE

This fictional bathroom renovation quote for Sydney, New South Wales has 7 itemised lines totalling A$5,987.42. Review the exact metric quantities and scope, then open the matching app-exported PDF. The 0% tax entry is only an example input.

Download the example PDF ↓ (https://quicklyestimates.com/assets/guides/bathroom-remodel/en-AU/estimate.pdf)How to estimate this work → (https://quicklyestimates.com/en-au/guides/how-to-estimate-bathroom-remodel/)

The 7.43 m² bathroom refresh scope

Refresh a 7.43 m² bathroom without moving walls or plumbing locations. Remove existing finishes, install owner-selected fixtures within stated allowances, replace floor tile, patch walls and paint. Retain the existing tub footprint.

This is an original fictional job set in Sydney, New South Wales. The location gives the example a recognisable setting; the rates are made-up inputs and do not describe local prices. Use the matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-bathroom-remodel/) to check what should be measured, selected or excluded on a real job.

Prepared by Harbour & Gum Projects · fictional business

Prepared for Alex Morgan · fictional customer

Example location Sydney, New South Wales

Issued / valid through 25 September 2026 / 25 October 2026

Itemised bathroom renovation example

Each amount is its quantity multiplied by its AUD unit rate, rounded to cents. These 7 entries match the fixture used to make the PDF. Metric surface and length units describe the priced work, not a conversion rule for another property.

Bathroom renovation example — AUD Work item | Quantity | Unit rate | Amount |

Protection and finish removal | 1 job | A$910.00 | A$910.00 |

Floor tile material allowance | 8.18 m² | A$75.50 | A$617.59 |

Floor tile installation | 7.43 m² | A$181.00 | A$1,344.83 |

Vanity and tap allowance | 1 set | A$1,330.00 | A$1,330.00 |

Plumbing fixture reconnection | 6 hours | A$133.00 | A$798.00 |

Wall patching and painting | 1 job | A$672.00 | A$672.00 |

Disposal and final cleanup | 1 job | A$315.00 | A$315.00 |

Subtotal / example total | A$5,987.42 |

Calculation check: 8.18 m² × A$75.50 = A$617.59; 7.43 m² × A$181.00 = A$1,344.83. The demonstration tax field is 0%, so the displayed total stays A$5,987.42. Determine tax and markup for your own work instead of using this input as guidance.

Assumptions and scope boundaries

Give the vanity, tap and tile their own material allowances. Put installation labour on separate lines. If the customer chooses a more expensive fixture, the material difference is visible without silently changing the labour amount. Record who orders, receives and checks the products.

Outside this example: No wall relocation, new shower assembly, concealed water-damage repair or electrical service changes. Verify any required approvals separately.

Selections, access or concealed conditions that differ from this scope require a revised quantity, allowance or separate line. The example deliberately separates them so the client can see what has and has not been priced.

Open the app-exported PDF

The PDF is a completed example exported from Estimates using this job data, fictional parties and the line amounts above. Read all pages to check notes as well as the total. The preview is the first page.

(https://quicklyestimates.com/assets/guides/bathroom-remodel/en-AU/estimate.pdf) Download bathroom renovation PDF ↓ (https://quicklyestimates.com/assets/guides/bathroom-remodel/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/bathroom-remodel/en-AU/estimate.pdf)

Adapt this example to your next job

- Replace the example location and project description with the actual site and client's requested result.
- Measure the work in the units shown, revising each quantity and product allowance to suit your plans and site inspection.
- Obtain your own supplier and labour inputs, then check access, protection, disposal and any specialist trade boundaries.
- Record exclusions and choices that remain open; review markup and tax for the actual quote.
- Preview every page of the PDF and check the item totals before sharing it.

- Confirm who supplies the tub, toilet and accessories.
- State which surfaces are tiled and which are painted.
- Record access, debris removal and protection requirements.
- List concealed repairs and layout changes outside the base scope.

Common questions about bathroom renovation

Should a bathroom estimate include fixture allowances?

Use an allowance when the final fixture has not been selected, and identify exactly which product cost it covers. Keep installation labour separate so a product upgrade can be priced clearly.

Is floor area enough to estimate a bathroom renovation?

No. Floor area helps with flooring, but fixture count, wall finishes, demolition and layout changes need their own quantities or scoped lines.

FROM SCOPE TO PDF

Make your own bathroom renovation estimate.

Describe the actual job in Estimates on iPhone or Android, then review every quantity, rate and scope note. Add your business and client details, check the document and share an itemised PDF. Example amounts are fictional, and some app features may require an in-app purchase.

Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the matching guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-bathroom-remodel/)

Related estimating resources

- Step-by-step guide for this scope (https://quicklyestimates.com/en-au/guides/how-to-estimate-bathroom-remodel/)
- Tile flooring estimate example (https://quicklyestimates.com/en-au/samples/tile-flooring-estimate/)
- How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/)

Actual app PDF: https://quicklyestimates.com/assets/guides/bathroom-remodel/en-AU/estimate.pdf
Get the app: https://quicklyestimates.com/en-au/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus