# Fascia and soffit replacement itemised cost breakdown and PDF in Australia Inspect an app-exported fascia and soffit replacement quote for one roof edge elevation in Adelaide, South Australia. Check 7 metric AUD lines, a fictional A$10,658.30 total and project exclusions. Canonical: https://quicklyestimates.com/en-au/samples/fascia-soffit-replacement-estimate/ Author: Estimates editorial team Published: 2026-09-25 Updated: 2026-09-25 This fictional Adelaide, South Australia fascia and soffit replacement example contains 7 itemised costs totalling A$10,658.30. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. EXAMPLE AT A GLANCE This fictional Adelaide, South Australia fascia and soffit replacement example contains 7 itemised costs totalling A$10,658.30. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-fascia-soffit-replacement/) Project scope: One roof edge elevation Replace a defined run of fascia and soffit boards on one accessible roof edge, with vent details and gutter refixing. This original fictional example is set in Adelaide, South Australia. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-fascia-soffit-replacement/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote. Example location Adelaide, South Australia Prepared by Harbour & Gum Projects · fictional business Prepared for Alex Morgan · fictional customer Issued / valid through 25 September 2026 / 25 October 2026 Itemised fascia and soffit replacement costs These 7 AUD lines reproduce the native app export. Gutter detach and support is measured as 28.96 m; Old board removal uses 28.96 m. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job. Fascia and soffit replacement example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount | Access setup and protection | 1 job | A$548.10 | A$548.10 | Gutter detach and support | 28.96 m | A$34.25 | A$991.88 | Old board removal | 28.96 m | A$42.75 | A$1,238.04 | Fascia board allowance | 30.48 m | A$77.00 | A$2,346.96 | Soffit and vent allowance | 30.48 m | A$68.50 | A$2,087.88 | Board fitting labour | 28.96 m | A$102.75 | A$2,975.64 | Gutter refix and cleanup | 1 job | A$469.80 | A$469.80 | Illustrative total | A$10,658.30 | Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them. Check the arithmetic Gutter detach and support: 28.96 m × A$34.25 = A$991.88. Old board removal: 28.96 m × A$42.75 = A$1,238.04. All other lines use the same quantity-by-rate calculation and sum to A$10,658.30 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total. Measurement to check: Measure fascia run, soffit width, corner returns and existing gutter fixings. Selection to check: Separate board material, vents and gutter brackets from access and installation. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote. Assumptions and exclusions Plan gutter support and weather protection before removing the old boards. Outside this stated scope: No roof covering replacement, full gutter renewal or concealed framing repair. Rotten rafter tails or damaged roof edge require additional carpentry. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF. Open the app-exported PDF The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Adelaide, South Australia market claim. (https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-AU/estimate.pdf) Adapt this example to a real job - Write the actual work boundary and site address; use this measurement basis: Measure fascia run, soffit width, corner returns and existing gutter fixings. - Confirm products, access and handoff responsibilities; record this selection decision: Separate board material, vents and gutter brackets from access and installation. - Replace all fictional product, labour and subcontractor rates with your own evidence. - Review quantities, extensions, total, GST and markup settings, client details and validity date. - Preview every PDF page and share the quote with the agreed exclusions. - Measure fascia run, soffit width, corner returns and existing gutter fixings. - Separate board material, vents and gutter brackets from access and installation. - Plan gutter support and weather protection before removing the old boards. - Rotten rafter tails or damaged roof edge require additional carpentry. Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-fascia-soffit-replacement/) for the project-specific scope and work sequence. Questions about this estimate Which quantity controls this fascia and soffit replacement estimate? Measure fascia run, soffit width, corner returns and existing gutter fixings. When should this fascia and soffit replacement quote be revised? Rotten rafter tails or damaged roof edge require additional carpentry. No roof covering replacement, full gutter renewal or concealed framing repair. TURN THE SCOPE INTO AN ITEMISED PDF Make your own fascia and soffit replacement estimate. Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase. Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-fascia-soffit-replacement/) Related Australian estimating resources - Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-fascia-soffit-replacement/) - Gutter guard installation estimate example (https://quicklyestimates.com/en-au/samples/gutter-guard-installation-estimate/) - How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/) Actual app PDF: https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-AU/estimate.pdf Get the app: https://quicklyestimates.com/en-au/download/ App Store (iPhone): https://apps.apple.com/app/id6740389403 Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus