# Floating shelf installation itemised quote example and PDF in Australia

Inspect an app-exported floating shelf installation quote for six shelves on two walls in Melbourne, Victoria. Check 7 metric AUD lines, a fictional A$3,366.89 total and project exclusions.

Canonical: https://quicklyestimates.com/en-au/samples/floating-shelves-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional Melbourne, Victoria floating shelf installation example contains 7 itemised costs totalling A$3,366.89. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below.

EXAMPLE AT A GLANCE

This fictional Melbourne, Victoria floating shelf installation example contains 7 itemised costs totalling A$3,366.89. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below.

Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/floating-shelves/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-floating-shelves/)

Project scope: Six shelves on two walls

Fit six selected floating shelves to two suitable interior walls using compatible concealed supports.

This original fictional example is set in Melbourne, Victoria. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-floating-shelves/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote.

Example location Melbourne, Victoria

Prepared by Harbour & Gum Projects · fictional business

Prepared for Alex Morgan · fictional customer

Issued / valid through 25 September 2026 / 25 October 2026

Itemised floating shelf installation costs

These 7 AUD lines reproduce the native app export. Shelf material allowance is measured as 6 each; Concealed bracket allowance uses 6 each. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job.

Floating shelf installation example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount |

Wall survey and set-out | 1 job | A$216.75 | A$216.75 |

Shelf material allowance | 6 each | A$173.40 | A$1,040.40 |

Concealed bracket allowance | 6 each | A$93.93 | A$563.58 |

Finish preparation | 1 job | A$260.10 | A$260.10 |

Fixing and shelf fit | 6 each | A$158.95 | A$953.70 |

Level and load check | 1 job | A$209.53 | A$209.53 |

Cleanup and touch-up | 1 job | A$122.83 | A$122.83 |

Illustrative total | A$3,366.89 |

Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them.

Check the arithmetic

Shelf material allowance: 6 each × A$173.40 = A$1,040.40. Concealed bracket allowance: 6 each × A$93.93 = A$563.58. All other lines use the same quantity-by-rate calculation and sum to A$3,366.89 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total.

Measurement to check: Measure shelf lengths, depth, wall construction and intended load for each position. Selection to check: Separate shelves, support brackets and finishing material. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote.

Assumptions and exclusions

Confirm fixing substrate before ordering bracket type and drill locations.

Outside this stated scope: No wall rebuilding, concealed cable relocation or guaranteed load beyond selected hardware.

Weak or unknown wall backing requires reinforcement or a changed design. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF.

Open the app-exported PDF

The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Melbourne, Victoria market claim.

(https://quicklyestimates.com/assets/guides/floating-shelves/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/floating-shelves/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/floating-shelves/en-AU/estimate.pdf)

Adapt this example to a real job

- Write the actual work boundary and site address; use this measurement basis: Measure shelf lengths, depth, wall construction and intended load for each position.
- Confirm products, access and handoff responsibilities; record this selection decision: Separate shelves, support brackets and finishing material.
- Replace all fictional product, labour and subcontractor rates with your own evidence.
- Review quantities, extensions, total, GST and markup settings, client details and validity date.
- Preview every PDF page and share the quote with the agreed exclusions.

- Measure shelf lengths, depth, wall construction and intended load for each position.
- Separate shelves, support brackets and finishing material.
- Confirm fixing substrate before ordering bracket type and drill locations.
- Weak or unknown wall backing requires reinforcement or a changed design.

Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-floating-shelves/) for the project-specific scope and work sequence.

Questions about this estimate

Which quantity controls this floating shelf installation estimate?

Measure shelf lengths, depth, wall construction and intended load for each position.

When should this floating shelf installation quote be revised?

Weak or unknown wall backing requires reinforcement or a changed design. No wall rebuilding, concealed cable relocation or guaranteed load beyond selected hardware.

TURN THE SCOPE INTO AN ITEMISED PDF

Make your own floating shelf installation estimate.

Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase.

Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-floating-shelves/)

Related Australian estimating resources

- Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-floating-shelves/)
- Pocket sliding door installation estimate example (https://quicklyestimates.com/en-au/samples/pocket-door-installation-estimate/)
- How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/)

Actual app PDF: https://quicklyestimates.com/assets/guides/floating-shelves/en-AU/estimate.pdf
Get the app: https://quicklyestimates.com/en-au/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus