# Laundry room storage fitout itemised quote example and PDF in Australia

Inspect an app-exported laundry storage fit-out quote for one utility alcove in Gold Coast, Queensland. Check 7 metric AUD lines, a fictional A$3,522.43 total and project exclusions.

Canonical: https://quicklyestimates.com/en-au/samples/laundry-room-fitout-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional Gold Coast, Queensland laundry storage fit-out example contains 7 itemised costs totalling A$3,522.43. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below.

EXAMPLE AT A GLANCE

This fictional Gold Coast, Queensland laundry storage fit-out example contains 7 itemised costs totalling A$3,522.43. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below.

Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/laundry-room-fitout/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-laundry-room-fitout/)

Project scope: One utility alcove

Fit upper storage cabinets and a folding surface above an existing laundry appliance run, leaving the appliances and services in place.

This original fictional example is set in Gold Coast, Queensland. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-laundry-room-fitout/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote.

Example location Gold Coast, Queensland

Prepared by Harbour & Gum Projects · fictional business

Prepared for Alex Morgan · fictional customer

Issued / valid through 25 September 2026 / 25 October 2026

Itemised laundry storage fit-out costs

These 7 AUD lines reproduce the native app export. Upper cabinet allowance is measured as 3 each; Cabinet hanging hardware uses 1 set. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job.

Laundry storage fit-out example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount |

Measure and protection | 1 job | A$207.20 | A$207.20 |

Upper cabinet allowance | 3 each | A$355.20 | A$1,065.60 |

Cabinet hanging hardware | 1 set | A$155.40 | A$155.40 |

Cabinet installation | 3 each | A$222.00 | A$666.00 |

Folding surface allowance | 1.83 m | A$461.00 | A$843.63 |

Surface fitting and edging | 1 job | A$407.00 | A$407.00 |

Appliance reinstatement and cleanup | 1 job | A$177.60 | A$177.60 |

Illustrative total | A$3,522.43 |

Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them.

Check the arithmetic

Upper cabinet allowance: 3 each × A$355.20 = A$1,065.60. Cabinet hanging hardware: 1 set × A$155.40 = A$155.40. All other lines use the same quantity-by-rate calculation and sum to A$3,522.43 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total.

Measurement to check: Measure appliance clearances, wall studs, door swing and usable counter length. Selection to check: Separate cabinet, surface and fixing allowances from installation labour. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote.

Assumptions and exclusions

Confirm appliances can be moved or protected and that ventilation and access remain usable.

Outside this stated scope: No appliance purchase, plumbing move, electrical alterations or floor works.

Hidden pipe or cable routes may require an adjusted fixing plan. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF.

Open the app-exported PDF

The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Gold Coast, Queensland market claim.

(https://quicklyestimates.com/assets/guides/laundry-room-fitout/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/laundry-room-fitout/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/laundry-room-fitout/en-AU/estimate.pdf)

Adapt this example to a real job

- Write the actual work boundary and site address; use this measurement basis: Measure appliance clearances, wall studs, door swing and usable counter length.
- Confirm products, access and handoff responsibilities; record this selection decision: Separate cabinet, surface and fixing allowances from installation labour.
- Replace all fictional product, labour and subcontractor rates with your own evidence.
- Review quantities, extensions, total, GST and markup settings, client details and validity date.
- Preview every PDF page and share the quote with the agreed exclusions.

- Measure appliance clearances, wall studs, door swing and usable counter length.
- Separate cabinet, surface and fixing allowances from installation labour.
- Confirm appliances can be moved or protected and that ventilation and access remain usable.
- Hidden pipe or cable routes may require an adjusted fixing plan.

Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-laundry-room-fitout/) for the project-specific scope and work sequence.

Questions about this estimate

Which quantity controls this laundry room storage fitout estimate?

Measure appliance clearances, wall studs, door swing and usable counter length.

When should this laundry room storage fitout quote be revised?

Hidden pipe or cable routes may require an adjusted fixing plan. No appliance purchase, plumbing move, electrical alterations or floor works.

TURN THE SCOPE INTO AN ITEMISED PDF

Make your own laundry storage fit-out estimate.

Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase.

Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-laundry-room-fitout/)

Related Australian estimating resources

- Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-laundry-room-fitout/)
- Ceiling painting estimate example (https://quicklyestimates.com/en-au/samples/ceiling-painting-estimate/)
- How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/)

Actual app PDF: https://quicklyestimates.com/assets/guides/laundry-room-fitout/en-AU/estimate.pdf
Get the app: https://quicklyestimates.com/en-au/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus