# Outdoor power power point installation itemised cost breakdown and PDF in Australia Inspect an app-exported outdoor power point installation quote for two garden power points in Newcastle, New South Wales. Check 7 metric AUD lines, a fictional A$3,709.53 total and project exclusions. Canonical: https://quicklyestimates.com/en-au/samples/outdoor-power-outlet-estimate/ Author: Estimates editorial team Published: 2026-09-25 Updated: 2026-09-25 This fictional Newcastle, New South Wales outdoor power point installation example contains 7 itemised costs totalling A$3,709.53. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. EXAMPLE AT A GLANCE This fictional Newcastle, New South Wales outdoor power point installation example contains 7 itemised costs totalling A$3,709.53. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/outdoor-power-outlet/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-outdoor-power-outlet/) Project scope: Two garden power points Install two weatherproof outdoor power points on an accessible wall using a confirmed suitable supply route. This original fictional example is set in Newcastle, New South Wales. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-outdoor-power-outlet/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote. Example location Newcastle, New South Wales Prepared by Harbour & Gum Projects · fictional business Prepared for Alex Morgan · fictional customer Issued / valid through 25 September 2026 / 25 October 2026 Itemised outdoor power point installation costs These 7 AUD lines reproduce the native app export. Weatherproof power point allowance is measured as 2 each; Cable and containment allowance uses 16.76 m. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job. Outdoor power point installation example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount | Supply and route survey | 1 job | A$234.95 | A$234.95 | Weatherproof power point allowance | 2 each | A$196.85 | A$393.70 | Cable and containment allowance | 16.76 m | A$66.75 | A$1,118.73 | Protective fittings allowance | 1 job | A$304.80 | A$304.80 | Cable routing labour | 7 hours | A$127.00 | A$889.00 | power point fitting | 2 each | A$241.30 | A$482.60 | Testing and labelling | 1 job | A$285.75 | A$285.75 | Illustrative total | A$3,709.53 | Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them. Check the arithmetic Weatherproof power point allowance: 2 each × A$196.85 = A$393.70. Cable and containment allowance: 16.76 m × A$66.75 = A$1,118.73. All other lines use the same quantity-by-rate calculation and sum to A$3,709.53 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total. Measurement to check: Measure route length, mounting positions, exposure and cable protection requirements. Selection to check: Separate enclosures, cable and protective devices from fitting labour. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote. Assumptions and exclusions A qualified installer must confirm supply suitability and local installation requirements. Outside this stated scope: No trench, new switchboard or power to detached buildings. An unsuitable source circuit or longer route changes materials and labour. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF. Open the app-exported PDF The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Newcastle, New South Wales market claim. (https://quicklyestimates.com/assets/guides/outdoor-power-outlet/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/outdoor-power-outlet/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/outdoor-power-outlet/en-AU/estimate.pdf) Adapt this example to a real job - Write the actual work boundary and site address; use this measurement basis: Measure route length, mounting positions, exposure and cable protection requirements. - Confirm products, access and handoff responsibilities; record this selection decision: Separate enclosures, cable and protective devices from fitting labour. - Replace all fictional product, labour and subcontractor rates with your own evidence. - Review quantities, extensions, total, GST and markup settings, client details and validity date. - Preview every PDF page and share the quote with the agreed exclusions. - Measure route length, mounting positions, exposure and cable protection requirements. - Separate enclosures, cable and protective devices from fitting labour. - A qualified installer must confirm supply suitability and local installation requirements. - An unsuitable source circuit or longer route changes materials and labour. Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-outdoor-power-outlet/) for the project-specific scope and work sequence. Questions about this estimate Which quantity controls this outdoor power power point installation estimate? Measure route length, mounting positions, exposure and cable protection requirements. When should this outdoor power power point installation quote be revised? An unsuitable source circuit or longer route changes materials and labour. No trench, new switchboard or power to detached buildings. TURN THE SCOPE INTO AN ITEMISED PDF Make your own outdoor power point installation estimate. Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase. Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-outdoor-power-outlet/) Related Australian estimating resources - Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-outdoor-power-outlet/) - Home office data cabling estimate example (https://quicklyestimates.com/en-au/samples/home-office-data-cabling-estimate/) - How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/) Actual app PDF: https://quicklyestimates.com/assets/guides/outdoor-power-outlet/en-AU/estimate.pdf Get the app: https://quicklyestimates.com/en-au/download/ App Store (iPhone): https://apps.apple.com/app/id6740389403 Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus