# Hydronic radiator replacement labour and materials estimate example in Australia Inspect an app-exported hydronic radiator replacement quote for two existing radiator positions in Albury, New South Wales. Check 7 metric AUD lines, a fictional A$3,348.00 total and project exclusions. Canonical: https://quicklyestimates.com/en-au/samples/radiator-replacement-estimate/ Author: Estimates editorial team Published: 2026-09-25 Updated: 2026-09-25 This fictional Albury, New South Wales hydronic radiator replacement example contains 7 itemised costs totalling A$3,348.00. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. EXAMPLE AT A GLANCE This fictional Albury, New South Wales hydronic radiator replacement example contains 7 itemised costs totalling A$3,348.00. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/radiator-replacement/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-radiator-replacement/) Project scope: Two existing radiator positions Replace two selected hydronic radiators at existing accessible positions, reconnecting suitable pipework and testing the system. This original fictional example is set in Albury, New South Wales. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-radiator-replacement/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote. Example location Albury, New South Wales Prepared by Harbour & Gum Projects · fictional business Prepared for Alex Morgan · fictional customer Issued / valid through 25 September 2026 / 25 October 2026 Itemised hydronic radiator replacement costs These 7 AUD lines reproduce the native app export. Radiator allowance is measured as 2 each; Valve and fitting allowance uses 2 set. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job. Hydronic radiator replacement example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount | System and position survey | 1 job | A$234.00 | A$234.00 | Drain-down and protection | 1 job | A$300.00 | A$300.00 | Radiator allowance | 2 each | A$504.00 | A$1,008.00 | Valve and fitting allowance | 2 set | A$198.00 | A$396.00 | Radiator fitting labour | 2 each | A$468.00 | A$936.00 | Refill and leak check | 1 job | A$294.00 | A$294.00 | Old unit disposal | 1 job | A$180.00 | A$180.00 | Illustrative total | A$3,348.00 | Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them. Check the arithmetic Radiator allowance: 2 each × A$504.00 = A$1,008.00. Valve and fitting allowance: 2 set × A$198.00 = A$396.00. All other lines use the same quantity-by-rate calculation and sum to A$3,348.00 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total. Measurement to check: Measure radiator size, heat-output basis, bracket position and valve connection at each location. Selection to check: Keep radiator products, valves and connection fittings separate. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote. Assumptions and exclusions Confirm isolation, drain-down and refill plan before removing old units. Outside this stated scope: No boiler replacement, new pipe routes or whole-system balancing. Corroded nearby pipework or unsuitable output selection changes scope. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF. Open the app-exported PDF The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Albury, New South Wales market claim. (https://quicklyestimates.com/assets/guides/radiator-replacement/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/radiator-replacement/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/radiator-replacement/en-AU/estimate.pdf) Adapt this example to a real job - Write the actual work boundary and site address; use this measurement basis: Measure radiator size, heat-output basis, bracket position and valve connection at each location. - Confirm products, access and handoff responsibilities; record this selection decision: Keep radiator products, valves and connection fittings separate. - Replace all fictional product, labour and subcontractor rates with your own evidence. - Review quantities, extensions, total, GST and markup settings, client details and validity date. - Preview every PDF page and share the quote with the agreed exclusions. - Measure radiator size, heat-output basis, bracket position and valve connection at each location. - Keep radiator products, valves and connection fittings separate. - Confirm isolation, drain-down and refill plan before removing old units. - Corroded nearby pipework or unsuitable output selection changes scope. Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-radiator-replacement/) for the project-specific scope and work sequence. Questions about this estimate Which quantity controls this hydronic radiator replacement estimate? Measure radiator size, heat-output basis, bracket position and valve connection at each location. When should this hydronic radiator replacement quote be revised? Corroded nearby pipework or unsuitable output selection changes scope. No boiler replacement, new pipe routes or whole-system balancing. TURN THE SCOPE INTO AN ITEMISED PDF Make your own hydronic radiator replacement estimate. Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase. Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-radiator-replacement/) Related Australian estimating resources - Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-radiator-replacement/) - Home solar battery installation estimate example (https://quicklyestimates.com/en-au/samples/solar-battery-installation-estimate/) - How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/) Actual app PDF: https://quicklyestimates.com/assets/guides/radiator-replacement/en-AU/estimate.pdf Get the app: https://quicklyestimates.com/en-au/download/ App Store (iPhone): https://apps.apple.com/app/id6740389403 Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus