# Stair handrail installation estimate example and PDF in Australia Inspect an app-exported stair handrail installation quote for one interior stair flight in Perth, Western Australia. Check 7 metric AUD lines, a fictional A$3,909.41 total and project exclusions. Canonical: https://quicklyestimates.com/en-au/samples/stair-handrail-installation-estimate/ Author: Estimates editorial team Published: 2026-09-25 Updated: 2026-09-25 This fictional Perth, Western Australia stair handrail installation example contains 7 itemised costs totalling A$3,909.41. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. EXAMPLE AT A GLANCE This fictional Perth, Western Australia stair handrail installation example contains 7 itemised costs totalling A$3,909.41. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/stair-handrail-installation/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-handrail-installation/) Project scope: One interior stair flight Install a new handrail along one existing interior stair flight on a suitable wall, with return ends and secure fixings. This original fictional example is set in Perth, Western Australia. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-handrail-installation/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote. Example location Perth, Western Australia Prepared by Harbour & Gum Projects · fictional business Prepared for Alex Morgan · fictional customer Issued / valid through 25 September 2026 / 25 October 2026 Itemised stair handrail installation costs These 7 AUD lines reproduce the native app export. Rail material allowance is measured as 6.1 m; Bracket allowance uses 5 each. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job. Stair handrail installation example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount | Stair survey and set-out | 1 job | A$251.60 | A$251.60 | Wall backing check | 1 job | A$229.40 | A$229.40 | Rail material allowance | 6.1 m | A$267.10 | A$1,629.31 | Bracket allowance | 5 each | A$62.16 | A$310.80 | Rail cutting and finish | 1 job | A$384.80 | A$384.80 | Handrail installation | 5.49 m | A$170.00 | A$933.30 | Final fixing check | 1 job | A$170.20 | A$170.20 | Illustrative total | A$3,909.41 | Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them. Check the arithmetic Rail material allowance: 6.1 m × A$267.10 = A$1,629.31. Bracket allowance: 5 each × A$62.16 = A$310.80. All other lines use the same quantity-by-rate calculation and sum to A$3,909.41 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total. Measurement to check: Measure slope length, fixing locations, wall build-up and start and end returns. Selection to check: Separate rail, brackets and finishing allowance. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote. Assumptions and exclusions Locate solid backing and approve rail height with local requirements checked before cutting. Outside this stated scope: No stair rebuilding, balustrade replacement or structural wall work. Missing backing or fragile wall finish changes fixing and repair scope. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF. Open the app-exported PDF The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Perth, Western Australia market claim. (https://quicklyestimates.com/assets/guides/stair-handrail-installation/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/stair-handrail-installation/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/stair-handrail-installation/en-AU/estimate.pdf) Adapt this example to a real job - Write the actual work boundary and site address; use this measurement basis: Measure slope length, fixing locations, wall build-up and start and end returns. - Confirm products, access and handoff responsibilities; record this selection decision: Separate rail, brackets and finishing allowance. - Replace all fictional product, labour and subcontractor rates with your own evidence. - Review quantities, extensions, total, GST and markup settings, client details and validity date. - Preview every PDF page and share the quote with the agreed exclusions. - Measure slope length, fixing locations, wall build-up and start and end returns. - Separate rail, brackets and finishing allowance. - Locate solid backing and approve rail height with local requirements checked before cutting. - Missing backing or fragile wall finish changes fixing and repair scope. Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-handrail-installation/) for the project-specific scope and work sequence. Questions about this estimate Which quantity controls this stair handrail installation estimate? Measure slope length, fixing locations, wall build-up and start and end returns. When should this stair handrail installation quote be revised? Missing backing or fragile wall finish changes fixing and repair scope. No stair rebuilding, balustrade replacement or structural wall work. TURN THE SCOPE INTO AN ITEMISED PDF Make your own stair handrail installation estimate. Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase. Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-handrail-installation/) Related Australian estimating resources - Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-handrail-installation/) - Attic ladder installation estimate example (https://quicklyestimates.com/en-au/samples/attic-ladder-installation-estimate/) - How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/) Actual app PDF: https://quicklyestimates.com/assets/guides/stair-handrail-installation/en-AU/estimate.pdf Get the app: https://quicklyestimates.com/en-au/download/ App Store (iPhone): https://apps.apple.com/app/id6740389403 Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus