# Stair nosing replacement estimate example and PDF in Australia

Inspect an app-exported stair nosing replacement quote for twelve interior stair edges in Geelong, Victoria. Check 6 metric AUD lines, a fictional A$3,326.90 total and project exclusions.

Canonical: https://quicklyestimates.com/en-au/samples/stair-nosing-installation-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional Geelong, Victoria stair nosing replacement example contains 6 itemised costs totalling A$3,326.90. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below.

EXAMPLE AT A GLANCE

This fictional Geelong, Victoria stair nosing replacement example contains 6 itemised costs totalling A$3,326.90. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below.

Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/stair-nosing-installation/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-nosing-installation/)

Project scope: Twelve interior stair edges

Remove worn nosings and fit selected replacement profiles to 12 sound interior stair edges, keeping existing tread finishes.

This original fictional example is set in Geelong, Victoria. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-nosing-installation/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote.

Example location Geelong, Victoria

Prepared by Harbour & Gum Projects · fictional business

Prepared for Alex Morgan · fictional customer

Issued / valid through 25 September 2026 / 25 October 2026

Itemised stair nosing replacement costs

These 6 AUD lines reproduce the native app export. Old nosing removal is measured as 12 each; Profile allowance uses 12.8 m. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job.

Stair nosing replacement example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount |

Stair survey and protection | 1 job | A$167.50 | A$167.50 |

Old nosing removal | 12 each | A$24.12 | A$289.44 |

Profile allowance | 12.8 m | A$105.50 | A$1,350.40 |

Fixing material allowance | 1 job | A$140.70 | A$140.70 |

Cut and fit labour | 12 each | A$96.48 | A$1,157.76 |

Edge finishing and clean | 1 job | A$221.10 | A$221.10 |

Illustrative total | A$3,326.90 |

Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them.

Check the arithmetic

Old nosing removal: 12 each × A$24.12 = A$289.44. Profile allowance: 12.8 m × A$105.50 = A$1,350.40. All other lines use the same quantity-by-rate calculation and sum to A$3,326.90 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total.

Measurement to check: Count stair edges, record each width and profile, and check tread thickness and substrate. Selection to check: Keep nosing profiles and fastening method explicit rather than hiding them in a per-stair rate. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote.

Assumptions and exclusions

Fit a sample edge to confirm projection and appearance before repeating.

Outside this stated scope: No stair structural work, tread replacement or floor refinishing.

Unsound treads or mismatched heights require repair beyond profile replacement. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF.

Open the app-exported PDF

The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Geelong, Victoria market claim.

(https://quicklyestimates.com/assets/guides/stair-nosing-installation/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/stair-nosing-installation/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/stair-nosing-installation/en-AU/estimate.pdf)

Adapt this example to a real job

- Write the actual work boundary and site address; use this measurement basis: Count stair edges, record each width and profile, and check tread thickness and substrate.
- Confirm products, access and handoff responsibilities; record this selection decision: Keep nosing profiles and fastening method explicit rather than hiding them in a per-stair rate.
- Replace all fictional product, labour and subcontractor rates with your own evidence.
- Review quantities, extensions, total, GST and markup settings, client details and validity date.
- Preview every PDF page and share the quote with the agreed exclusions.

- Count stair edges, record each width and profile, and check tread thickness and substrate.
- Keep nosing profiles and fastening method explicit rather than hiding them in a per-stair rate.
- Fit a sample edge to confirm projection and appearance before repeating.
- Unsound treads or mismatched heights require repair beyond profile replacement.

Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-nosing-installation/) for the project-specific scope and work sequence.

Questions about this estimate

Which quantity controls this stair nosing replacement estimate?

Count stair edges, record each width and profile, and check tread thickness and substrate.

When should this stair nosing replacement quote be revised?

Unsound treads or mismatched heights require repair beyond profile replacement. No stair structural work, tread replacement or floor refinishing.

TURN THE SCOPE INTO AN ITEMISED PDF

Make your own stair nosing replacement estimate.

Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase.

Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-nosing-installation/)

Related Australian estimating resources

- Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-stair-nosing-installation/)
- Concrete floor polishing estimate example (https://quicklyestimates.com/en-au/samples/concrete-floor-polishing-estimate/)
- How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/)

Actual app PDF: https://quicklyestimates.com/assets/guides/stair-nosing-installation/en-AU/estimate.pdf
Get the app: https://quicklyestimates.com/en-au/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus