# Subfloor replacement estimate example and PDF in Australia Inspect an app-exported timber subfloor replacement quote for one damaged bedroom floor in Sydney, New South Wales. Check 7 metric AUD lines, a fictional A$4,407.11 total and project exclusions. Canonical: https://quicklyestimates.com/en-au/samples/subfloor-replacement-estimate/ Author: Estimates editorial team Published: 2026-09-25 Updated: 2026-09-25 This fictional Sydney, New South Wales timber subfloor replacement example contains 7 itemised costs totalling A$4,407.11. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. EXAMPLE AT A GLANCE This fictional Sydney, New South Wales timber subfloor replacement example contains 7 itemised costs totalling A$4,407.11. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/subfloor-replacement/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-subfloor-replacement/) Project scope: One damaged bedroom floor Lift the existing finish and replace a defined damaged subfloor area over sound framing, then leave a suitable surface for a separately priced finish floor. This original fictional example is set in Sydney, New South Wales. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-subfloor-replacement/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote. Example location Sydney, New South Wales Prepared by Harbour & Gum Projects · fictional business Prepared for Alex Morgan · fictional customer Issued / valid through 25 September 2026 / 25 October 2026 Itemised timber subfloor replacement costs These 7 AUD lines reproduce the native app export. Finish floor lifting is measured as 14.86 m²; Damaged sheet removal uses 14.86 m². Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job. Timber subfloor replacement example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount | Protection and floor opening | 1 job | A$241.20 | A$241.20 | Finish floor lifting | 14.86 m² | A$43.50 | A$646.41 | Damaged sheet removal | 14.86 m² | A$57.50 | A$854.45 | Subfloor sheet allowance | 6 sheets | A$77.72 | A$466.32 | Blocking and fasteners | 1 job | A$281.40 | A$281.40 | Sheet fitting labour | 14.86 m² | A$115.50 | A$1,716.33 | Disposal and level check | 1 job | A$201.00 | A$201.00 | Illustrative total | A$4,407.11 | Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them. Check the arithmetic Finish floor lifting: 14.86 m² × A$43.50 = A$646.41. Damaged sheet removal: 14.86 m² × A$57.50 = A$854.45. All other lines use the same quantity-by-rate calculation and sum to A$4,407.11 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total. Measurement to check: Measure the opened area, sheet layout, joist spacing and access route; record why the existing sheet failed. Selection to check: Separate sheet material, blocking and fasteners from removal and fitting labour. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote. Assumptions and exclusions Confirm moisture source and framing condition after lifting before ordering the final sheet count. Outside this stated scope: No finished floor installation, joist replacement or moisture-source repair. Rotten joists or continuing moisture requires a new repair design. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF. Open the app-exported PDF The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Sydney, New South Wales market claim. (https://quicklyestimates.com/assets/guides/subfloor-replacement/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/subfloor-replacement/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/subfloor-replacement/en-AU/estimate.pdf) Adapt this example to a real job - Write the actual work boundary and site address; use this measurement basis: Measure the opened area, sheet layout, joist spacing and access route; record why the existing sheet failed. - Confirm products, access and handoff responsibilities; record this selection decision: Separate sheet material, blocking and fasteners from removal and fitting labour. - Replace all fictional product, labour and subcontractor rates with your own evidence. - Review quantities, extensions, total, GST and markup settings, client details and validity date. - Preview every PDF page and share the quote with the agreed exclusions. - Measure the opened area, sheet layout, joist spacing and access route; record why the existing sheet failed. - Separate sheet material, blocking and fasteners from removal and fitting labour. - Confirm moisture source and framing condition after lifting before ordering the final sheet count. - Rotten joists or continuing moisture requires a new repair design. Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-subfloor-replacement/) for the project-specific scope and work sequence. Questions about this estimate Which quantity controls this subfloor replacement estimate? Measure the opened area, sheet layout, joist spacing and access route; record why the existing sheet failed. When should this subfloor replacement quote be revised? Rotten joists or continuing moisture requires a new repair design. No finished floor installation, joist replacement or moisture-source repair. TURN THE SCOPE INTO AN ITEMISED PDF Make your own timber subfloor replacement estimate. Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase. Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-subfloor-replacement/) Related Australian estimating resources - Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-subfloor-replacement/) - Floor levelling preparation estimate example (https://quicklyestimates.com/en-au/samples/floor-leveling-estimate/) - How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/) Actual app PDF: https://quicklyestimates.com/assets/guides/subfloor-replacement/en-AU/estimate.pdf Get the app: https://quicklyestimates.com/en-au/download/ App Store (iPhone): https://apps.apple.com/app/id6740389403 Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus