# Heating thermostat replacement estimate example and PDF in Australia Inspect an app-exported heating thermostat replacement quote for two controlled zones in Cairns, Queensland. Check 7 metric AUD lines, a fictional A$2,316.20 total and project exclusions. Canonical: https://quicklyestimates.com/en-au/samples/thermostat-replacement-estimate/ Author: Estimates editorial team Published: 2026-09-25 Updated: 2026-09-25 This fictional Cairns, Queensland heating thermostat replacement example contains 7 itemised costs totalling A$2,316.20. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. EXAMPLE AT A GLANCE This fictional Cairns, Queensland heating thermostat replacement example contains 7 itemised costs totalling A$2,316.20. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below. Download itemised PDF ↓ (https://quicklyestimates.com/assets/guides/thermostat-replacement/en-AU/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-thermostat-replacement/) Project scope: Two controlled zones Replace two existing room thermostats with selected compatible controls at the same locations, then verify operation of each zone. This original fictional example is set in Cairns, Queensland. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-thermostat-replacement/) explains which measurements, product decisions and site conditions turn this brief into a client-ready quote. Example location Cairns, Queensland Prepared by Harbour & Gum Projects · fictional business Prepared for Alex Morgan · fictional customer Issued / valid through 25 September 2026 / 25 October 2026 Itemised heating thermostat replacement costs These 7 AUD lines reproduce the native app export. Old control removal is measured as 2 each; Thermostat allowance uses 2 each. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job. Heating thermostat replacement example — AUD, fictional inputs Work item | Quantity | Unit rate | Amount | System compatibility check | 1 job | A$266.40 | A$266.40 | Old control removal | 2 each | A$96.20 | A$192.40 | Thermostat allowance | 2 each | A$355.20 | A$710.40 | Interface parts allowance | 1 job | A$222.00 | A$222.00 | Control installation | 2 each | A$259.00 | A$518.00 | Zone operation check | 2 each | A$140.60 | A$281.20 | User handoff | 1 job | A$125.80 | A$125.80 | Illustrative total | A$2,316.20 | Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them. Check the arithmetic Old control removal: 2 each × A$96.20 = A$192.40. Thermostat allowance: 2 each × A$355.20 = A$710.40. All other lines use the same quantity-by-rate calculation and sum to A$2,316.20 . Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total. Measurement to check: Identify heating equipment, wiring at each control, voltage and available mounting space. Selection to check: Keep thermostat products and any interface module as separate allowances. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote. Assumptions and exclusions Check compatibility before removing controls and test each zone after replacement. Outside this stated scope: No heating plant replacement, new control cable route or network setup guarantee. Missing conductors or proprietary controls can change the product choice. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF. Open the app-exported PDF The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Cairns, Queensland market claim. (https://quicklyestimates.com/assets/guides/thermostat-replacement/en-AU/estimate.pdf) Download example PDF ↓ (https://quicklyestimates.com/assets/guides/thermostat-replacement/en-AU/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/thermostat-replacement/en-AU/estimate.pdf) Adapt this example to a real job - Write the actual work boundary and site address; use this measurement basis: Identify heating equipment, wiring at each control, voltage and available mounting space. - Confirm products, access and handoff responsibilities; record this selection decision: Keep thermostat products and any interface module as separate allowances. - Replace all fictional product, labour and subcontractor rates with your own evidence. - Review quantities, extensions, total, GST and markup settings, client details and validity date. - Preview every PDF page and share the quote with the agreed exclusions. - Identify heating equipment, wiring at each control, voltage and available mounting space. - Keep thermostat products and any interface module as separate allowances. - Check compatibility before removing controls and test each zone after replacement. - Missing conductors or proprietary controls can change the product choice. Read the paired estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-thermostat-replacement/) for the project-specific scope and work sequence. Questions about this estimate Which quantity controls this heating thermostat replacement estimate? Identify heating equipment, wiring at each control, voltage and available mounting space. When should this heating thermostat replacement quote be revised? Missing conductors or proprietary controls can change the product choice. No heating plant replacement, new control cable route or network setup guarantee. TURN THE SCOPE INTO AN ITEMISED PDF Make your own heating thermostat replacement estimate. Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase. Create a quote ↗ (https://quicklyestimates.com/en-au/download/)Read the estimating guide → (https://quicklyestimates.com/en-au/guides/how-to-estimate-thermostat-replacement/) Related Australian estimating resources - Matching estimating guide (https://quicklyestimates.com/en-au/guides/how-to-estimate-thermostat-replacement/) - Heat recovery ventilation installation estimate example (https://quicklyestimates.com/en-au/samples/heat-recovery-ventilation-estimate/) - How to create a clear tradie quote (https://quicklyestimates.com/en-au/guides/create-a-tradie-quote/) Actual app PDF: https://quicklyestimates.com/assets/guides/thermostat-replacement/en-AU/estimate.pdf Get the app: https://quicklyestimates.com/en-au/download/ App Store (iPhone): https://apps.apple.com/app/id6740389403 Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus