# Garden path lighting installation estimate scope checklist in Canada

Plan a garden path lighting installation estimate in Canada for six low-voltage garden lights. Review measured quantities, the Fredericton, New Brunswick CAD calculation, scope exclusions and matching PDF.

Canonical: https://quicklyestimates.com/en-ca/guides/how-to-estimate-garden-lighting-installation/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

For six low-voltage garden lights, start with a defined scope and measurement basis. Count fixtures, measure cable run and identify transformer location and crossing points. Separate fixtures, transformer and cable allowances. Price the listed tasks separately and state the condition that would require a revision: Unknown buried services or a longer path changes route and quantity. The Fredericton, New Brunswick worked example checks 7 CAD cost lines against the measured scope, with a C$5,049.00 illustrative subtotal before tax or markup.

THE ESTIMATING ANSWER

For six low-voltage garden lights, start with a defined scope and measurement basis. Count fixtures, measure cable run and identify transformer location and crossing points. Separate fixtures, transformer and cable allowances. Price the listed tasks separately and state the condition that would require a revision: Unknown buried services or a longer path changes route and quantity.

This guide uses a fictional project in Fredericton, New Brunswick: Six low-voltage garden lights . Its matching estimate and PDF (https://quicklyestimates.com/en-ca/samples/garden-lighting-installation-estimate/) give each scope decision a visible CAD cost line. Use the document to understand the structure; verify the actual building, product schedule, labour and supplier inputs before preparing a client quote.

1. Define the measured job

Install six selected low-voltage lights along one garden path with transformer, cable and a defined shallow route. Count fixtures, measure cable run and identify transformer location and crossing points. Record the measurements and existing condition in the estimate before turning quantities into line items. The scope should make clear why this is a separate project from a broader renovation or maintenance quote.

Measurement basis: Count fixtures, measure cable run and identify transformer location and crossing points.

2. Build a product and labour schedule

Separate fixtures, transformer and cable allowances. This example has 7 distinct lines, including garden lighting layout, light fitting allowance, transformer and timer allowance. Use actual supplier prices and labour inputs for a customer job; the displayed amounts are fictional document inputs.

Selections to confirm: Separate fixtures, transformer and cable allowances.

3. Sequence the work and handoffs

Mock up light positions before trenching and confirm the power source. Show which task depends on access, a selected product or another trade. If that dependency is still open, label the price preliminary and identify the information needed before a firm quote.

Work sequence: Mock up light positions before trenching and confirm the power source.

4. Set a change boundary

Unknown buried services or a longer path changes route and quantity. The example excludes utility trench across public land, landscape rebuild or security system. Record the discovery, agree the revised work and update the estimate before adding it to the job.

If the job changes: Unknown buried services or a longer path changes route and quantity.

Review the Canadian job address

Have the actual supply route, mounting and testing reviewed by the qualified person doing the work. Confirm any approval or inspection requirements for the project address before issuing a final price.

The cable and connector allowance line uses 180 linear ft., approximately 54.86 m. Check the route, cuts and supplier unit before setting a real quantity. The example amounts are fictional CAD document inputs, not current rates for Fredericton, New Brunswick or another community. A site visit and current supplier information are needed to replace them.

Work through the itemized calculation

Check each extension of quantity and rate in the paired PDF. Two lines from this project are:

- Light fitting allowance: 6 each × C$130.00 = C$780.00.
- Transformer and timer allowance: 1 set × C$410.00 = C$410.00.

Adding all 7 rounded line amounts gives C$5,049.00 . The PDF shows 0% tax and the same total before any markup. The sample shows 0% tax only to make the arithmetic visible. Determine any applicable GST, HST or PST and markup for the actual work before sharing a quote.

Garden path lighting installation example · CAD Work item | Quantity | Unit rate | Amount |

Garden lighting layout | 1 job | C$215.00 | C$215.00 |

Light fitting allowance | 6 each | C$130.00 | C$780.00 |

Transformer and timer allowance | 1 set | C$410.00 | C$410.00 |

Cable and connector allowance | 180 linear ft. | C$4.80 | C$864.00 |

Shallow cable route labour | 150 linear ft. | C$11.00 | C$1,650.00 |

Light fitting and aiming | 6 each | C$140.00 | C$840.00 |

Testing and reinstatement | 1 job | C$290.00 | C$290.00 |

Illustrative subtotal | C$5,049.00 |

Scope and pricing boundaries

Install six selected low-voltage lights along one garden path with transformer, cable and a defined shallow route.

Outside this example: No utility trench across public land, landscape rebuild or security system.

Keep the product allowance, installation work and any unresolved condition visible as separate decisions. If access or the selected product changes, update the affected quantity or rate and explain the revision before the client relies on the estimate.

Before you send the estimate

- Count fixtures, measure cable run and identify transformer location and crossing points.
- Separate fixtures, transformer and cable allowances.
- Mock up light positions before trenching and confirm the power source.
- Unknown buried services or a longer path changes route and quantity.

Check the business, client, property, dates, line extensions and notes. The garden path lighting installation PDF example (https://quicklyestimates.com/en-ca/samples/garden-lighting-installation-estimate/) shows one way to present them. Its short PDF note lists the brief's scope exclusions; the fuller project limits above should guide your own scope.

Questions about this estimate

Which quantity controls this garden path lighting installation estimate?

Count fixtures, measure cable run and identify transformer location and crossing points.

When should this garden path lighting installation quote be revised?

Unknown buried services or a longer path changes route and quantity. No utility trench across public land, landscape rebuild or security system.

(https://quicklyestimates.com/en-ca/samples/garden-lighting-installation-estimate/) First page of the fictional garden path lighting installation estimate PDF in CAD · View the matching example (https://quicklyestimates.com/en-ca/samples/garden-lighting-installation-estimate/)

MAKE THE NEXT ESTIMATE YOUR OWN

Build a garden path lighting installation estimate.

Enter the job scope in Estimates on iPhone or Android or start from an AI-assisted draft. Check every quantity, rate, allowance, client detail and note before exporting the PDF. Some app features may require an in-app purchase.

Create an estimate ↗ (https://quicklyestimates.com/en-ca/download/)Inspect the PDF example → (https://quicklyestimates.com/en-ca/samples/garden-lighting-installation-estimate/)

Continue planning the work

- Garden path lighting installation itemized quote example and PDF (https://quicklyestimates.com/en-ca/samples/garden-lighting-installation-estimate/)
- Central heat pump installation example (https://quicklyestimates.com/en-ca/samples/central-heat-pump-installation-estimate/)
- Create a contractor estimate for a Canadian client (https://quicklyestimates.com/en-ca/guides/create-a-contractor-estimate/)

Get the app: https://quicklyestimates.com/en-ca/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus