# Asphalt driveway sealing estimate example in Canada: Vancouver PDF

Inspect the Vancouver, British Columbia asphalt driveway sealing estimate with 6 line items, a C$2,408.00 illustrative total and an app-exported PDF. Match every quantity to the scope.

Canonical: https://quicklyestimates.com/en-ca/samples/asphalt-driveway-sealing-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional Vancouver, British Columbia asphalt driveway sealing example has 6 itemized costs and a C$2,408.00 total before tax or markup. The PDF, quantities, unit rates and scope assumptions match the table below.

EXAMPLE AT A GLANCE

This fictional Vancouver, British Columbia asphalt driveway sealing example has 6 itemized costs and a C$2,408.00 total before tax or markup. The PDF, quantities, unit rates and scope assumptions match the table below.

Use this completed asphalt driveway sealing document to see how a specific job becomes a client-facing estimate. The project, business, customer and amounts are fictional. For the 1,200 sq. ft. residential driveway in Vancouver, British Columbia, the example uses the measured trade units shown in its PDF. Residential jobs may mix square feet, linear feet, counts and supplier units; keep each line’s measurement basis visible. Check access, grades, drainage and seasonal site conditions. Confirm any property-line, utility, design or municipal requirements that apply before committing to the work. The figures are fictional CAD inputs, not a local price survey.

Download example PDF ↓ (https://quicklyestimates.com/assets/guides/asphalt-driveway-sealing/en-CA/estimate.pdf)Read the matching estimating guide → (https://quicklyestimates.com/en-ca/guides/how-to-estimate-asphalt-driveway-sealing/)

Project scope: 1,200 sq. ft. residential driveway

Clean and seal 1,200 square feet of accessible asphalt driveway after a condition review. Include surface preparation, 80 linear feet of limited crack-fill allowance, coating material allowance, application and cleanup. No resurfacing or pothole repair.

Example location Vancouver, British Columbia

Prepared by Cedar & Beam Builders · fictional business

Prepared for Jordan Taylor · fictional client

Issued / valid through September 25 / October 25, 2026

Measure this work on the actual property before using any quantity. The illustration separates supplied products or materials from installation where the selection could change. A client should be able to compare each line with the agreed work, the selected products and the limits recorded in the notes.

The 6 itemized costs in Canadian dollars

Every row below is taken from the corresponding app-exported PDF fixture. Multiply the quantity by the unit rate to check the amount. These rates were chosen for this fictional example; they are not advertised prices or current averages for Vancouver, British Columbia.

Asphalt driveway sealing example · CAD Work item | Quantity | Unit rate | Amount |

Surface review and setup | 1 job | C$190.00 | C$190.00 |

Driveway cleaning and preparation | 1200 sq. ft. | C$0.35 | C$420.00 |

Limited crack filling | 80 linear ft. | C$4.35 | C$348.00 |

Sealer material allowance | 1 job | C$695.00 | C$695.00 |

Sealer application labour | 1200 sq. ft. | C$0.50 | C$600.00 |

Protection removal and cleanup | 1 job | C$155.00 | C$155.00 |

Subtotal / example total | C$2,408.00 |

Two calculation checks:

- Driveway cleaning and preparation: 1200 sq. ft. × C$0.35 = C$420.00.
- Limited crack filling: 80 linear ft. × C$4.35 = C$348.00.

The PDF shows a 0% tax entry, so the illustrated tax is C$0.00 and the total remains C$2,408.00. This only describes the example. Confirm the applicable tax treatment and any markup for the real job before issuing your estimate.

Assumptions that change the price

Sketch the driveway, including branches and excluded surfaces. The 1,200-square-foot number is asphalt receiving coating, not lot or property area.

Record cracks, holes and failed areas. This example has a limited measured crack-fill line; potholes or resurfacing are distinct repairs.

Confirm product, preparation and application assumptions with the supplier and site conditions. The material dollar amount is fictional, not a coverage recommendation.

Outside this example: No pothole repair, resurfacing, base repair, oil-remediation guarantee or coating of concrete surfaces.

Check access, grades, drainage and seasonal site conditions. Confirm any property-line, utility, design or municipal requirements that apply before committing to the work. An allowance is a stated placeholder, not a promise to cover all work discovered later. If a selected product, quantity or hidden condition changes, update the affected line and explain the revision before proceeding.

Download the actual app PDF

The linked PDF was exported from Estimates for this fictional Canadian project. It carries the project scope, customer, work items, quantities, CAD rates and subtotal used in this table, plus a short note on tax, markup and one key exclusion. The detailed exclusions above remain important when adapting the example. Preview every PDF page, including the final totals and note.

(https://quicklyestimates.com/assets/guides/asphalt-driveway-sealing/en-CA/estimate.pdf) Download asphalt driveway sealing PDF ↓ (https://quicklyestimates.com/assets/guides/asphalt-driveway-sealing/en-CA/estimate.pdf)Open PDF ↗ (https://quicklyestimates.com/assets/guides/asphalt-driveway-sealing/en-CA/estimate.pdf)

Use the structure for a real job

- Replace Vancouver, British Columbia and the example scope with the actual site and customer details.
- Measure the work and confirm the product schedule with the client.
- Replace every fictional CAD rate with your own labour, supplier and subcontractor inputs.
- Check exclusions, approvals, tax, markup and the document’s validity period for the real project.
- Preview the final PDF and recheck the total before sharing.

- Measure pavement area.
- Count and locate cracks.
- Confirm product and condition suitability.
- Agree access and protection.

Common questions

Will sealing repair a failed driveway?

No. Assess failed pavement separately and quote repair or replacement where needed.

Should crack filling be one allowance?

A measured length and stated repair limit make the allowance clearer than an undefined promise to fill all cracks.

For the planning steps behind this document, read the asphalt driveway sealing estimating guide (https://quicklyestimates.com/en-ca/guides/how-to-estimate-asphalt-driveway-sealing/).

Create your own estimate ↗ (https://quicklyestimates.com/en-ca/download/)

Actual app PDF: https://quicklyestimates.com/assets/guides/asphalt-driveway-sealing/en-CA/estimate.pdf
Get the app: https://quicklyestimates.com/en-ca/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus