# Fascia and soffit replacement itemized cost breakdown and PDF in Canada

Inspect an app-exported fascia and soffit replacement estimate for one roof edge elevation in Vancouver, British Columbia. Check 7 CAD line items, a C$10,425.00 fictional total and the scope assumptions.

Canonical: https://quicklyestimates.com/en-ca/samples/fascia-soffit-replacement-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional Vancouver, British Columbia fascia and soffit replacement example contains 7 itemized costs totaling C$10,425.00 before tax or markup. The app-exported PDF uses the exact quantities and CAD rates shown in the table, with scope limits explained below.

EXAMPLE AT A GLANCE

This fictional Vancouver, British Columbia fascia and soffit replacement example contains 7 itemized costs totaling C$10,425.00 before tax or markup. The app-exported PDF uses the exact quantities and CAD rates shown in the table, with scope limits explained below.

Download sample PDF ↓ (https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-CA/estimate.pdf)Read the estimating guide → (https://quicklyestimates.com/en-ca/guides/how-to-estimate-fascia-soffit-replacement/)

Project scope: One roof edge elevation

Replace a defined run of fascia and soffit boards on one accessible roof edge, with vent details and gutter refixing.

The fictional project is set in Vancouver, British Columbia. Cedar & Beam Builders and Jordan Taylor are example names, not a contractor and client case study. The matching guide (https://quicklyestimates.com/en-ca/guides/how-to-estimate-fascia-soffit-replacement/) explains how measurement, product selection and site conditions affect the estimate.

Location Vancouver, British Columbia

Prepared by Cedar & Beam Builders · fictional business

Prepared for Jordan Taylor · fictional client

Issued / valid through September 25 / October 25, 2026

The 7 CAD cost lines

The table uses the exact items, quantities and unit rates in the app-exported PDF. Multiply each quantity by its rate to check the amount. These chosen figures demonstrate the document; they are not surveyed prices or suggested rates for Vancouver, British Columbia.

Fascia and soffit replacement example · CAD Work item | Quantity | Unit rate | Amount |

Access setup and protection | 1 job | C$535.00 | C$535.00 |

Gutter detach and support | 95 linear ft. | C$10.00 | C$950.00 |

Old board removal | 95 linear ft. | C$13.00 | C$1,235.00 |

Fascia board allowance | 100 linear ft. | C$23.00 | C$2,300.00 |

Soffit and vent allowance | 100 linear ft. | C$20.00 | C$2,000.00 |

Board fitting labour | 95 linear ft. | C$31.00 | C$2,945.00 |

Gutter refix and cleanup | 1 job | C$460.00 | C$460.00 |

Illustrative subtotal | C$10,425.00 |

Check the arithmetic

- Gutter detach and support: 95 linear ft. × C$10.00 = C$950.00.
- Old board removal: 95 linear ft. × C$13.00 = C$1,235.00.

The rounded line amounts add to C$10,425.00 . The PDF's tax field is 0%, so its illustrated total stays C$10,425.00 before any markup. The sample shows 0% tax only to make the arithmetic visible. Determine any applicable GST, HST or PST and markup for the actual work before sharing a quote.

Measurement to verify: Measure fascia run, soffit width, corner returns and existing gutter fixings. Product decision: Separate board material, vents and gutter brackets from access and installation.

The gutter detach and support line uses 95 linear ft., approximately 28.96 m. Check the route, cuts and supplier unit before setting a real quantity.

Assumptions and exclusions

Plan gutter support and weather protection before removing the old boards.

Outside this example: No roof covering replacement, full gutter renewal or concealed framing repair.

Rotten rafter tails or damaged roof edge require additional carpentry. Review access, grades, drainage and seasonal conditions at the property. Check utility locations, product availability and any local design or municipal requirements that apply to the real scope. Confirm a change and update the estimate before adding work that was not in the base scope.

Download the actual app PDF

The PDF was exported from Estimates for this fictional Canadian job. It carries a concise version of the project scope, plus the same customer, cost lines, CAD amounts and total used here. Its note covers the fictional tax setting and the brief's full exclusion sentence; the article records additional assumptions that do not fit in that PDF note.

(https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-CA/estimate.pdf) Download fascia and soffit replacement PDF ↓ (https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-CA/estimate.pdf)Open PDF ↗ (https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-CA/estimate.pdf)

Build the next estimate from your own inputs

- Measure the actual site and describe the work boundary in plain language.
- Confirm the selected products, access and handoff responsibilities with the client.
- Replace every fictional rate with your own labour, supplier and subcontractor figures.
- Check the relevant GST, HST or PST treatment and markup for the job without copying this sample's zero entry.
- Preview each PDF page, total and exclusion note before sharing.

- Measure fascia run, soffit width, corner returns and existing gutter fixings.
- Separate board material, vents and gutter brackets from access and installation.
- Plan gutter support and weather protection before removing the old boards.
- Rotten rafter tails or damaged roof edge require additional carpentry.

Questions about this estimate

Which quantity controls this fascia and soffit replacement estimate?

Measure fascia run, soffit width, corner returns and existing gutter fixings.

When should this fascia and soffit replacement quote be revised?

Rotten rafter tails or damaged roof edge require additional carpentry. No roof covering replacement, full gutter renewal or concealed framing repair.

MAKE THE NEXT ESTIMATE YOUR OWN

Build a fascia and soffit replacement estimate.

Enter the job scope in Estimates on iPhone or Android or start from an AI-assisted draft. Check every quantity, rate, allowance, client detail and note before exporting the PDF. Some app features may require an in-app purchase.

Create an estimate ↗ (https://quicklyestimates.com/en-ca/download/)Read the estimating guide → (https://quicklyestimates.com/en-ca/guides/how-to-estimate-fascia-soffit-replacement/)

Continue planning the work

- How to price fascia and soffit replacement work (https://quicklyestimates.com/en-ca/guides/how-to-estimate-fascia-soffit-replacement/)
- Gutter guard installation example (https://quicklyestimates.com/en-ca/samples/gutter-guard-installation-estimate/)
- Create a contractor estimate for a Canadian client (https://quicklyestimates.com/en-ca/guides/create-a-contractor-estimate/)

Actual app PDF: https://quicklyestimates.com/assets/guides/fascia-soffit-replacement/en-CA/estimate.pdf
Get the app: https://quicklyestimates.com/en-ca/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus