# Brick joint repointing estimate example in Canada: Calgary PDF

Inspect the Calgary, Alberta brick joint repointing estimate with 6 line items, a C$4,539.00 illustrative total and an app-exported PDF. Match every quantity to the scope.

Canonical: https://quicklyestimates.com/en-ca/samples/masonry-repointing-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional Calgary, Alberta brick joint repointing example has 6 itemized costs and a C$4,539.00 total before tax or markup. The PDF, quantities, unit rates and scope assumptions match the table below.

EXAMPLE AT A GLANCE

This fictional Calgary, Alberta brick joint repointing example has 6 itemized costs and a C$4,539.00 total before tax or markup. The PDF, quantities, unit rates and scope assumptions match the table below.

Use this completed brick joint repointing document to see how a specific job becomes a client-facing estimate. The project, business, customer and amounts are fictional. For the 120 sq. ft. accessible brick wall area in Calgary, Alberta, the example uses the measured trade units shown in its PDF. Residential jobs may mix square feet, linear feet, counts and supplier units; keep each line’s measurement basis visible. Confirm site access, product selections and existing conditions in person. Check any trade or municipal requirements for the actual location, and record changes before issuing a final price. The figures are fictional CAD inputs, not a local price survey.

Download example PDF ↓ (https://quicklyestimates.com/assets/guides/masonry-repointing/en-CA/estimate.pdf)Read the matching estimating guide → (https://quicklyestimates.com/en-ca/guides/how-to-estimate-masonry-repointing/)

Project scope: 120 sq. ft. accessible brick wall area

Repoint visibly deteriorated mortar joints within 120 square feet of accessible brick wall after a condition review. Include protection, joint preparation, compatible mortar allowance, placement, cleaning and cleanup. No structural rebuilding, water-intrusion diagnosis or high access.

Example location Calgary, Alberta

Prepared by Cedar & Beam Builders · fictional business

Prepared for Jordan Taylor · fictional client

Issued / valid through September 25 / October 25, 2026

Measure this work on the actual property before using any quantity. The illustration separates supplied products or materials from installation where the selection could change. A client should be able to compare each line with the agreed work, the selected products and the limits recorded in the notes.

The 6 itemized costs in Canadian dollars

Every row below is taken from the corresponding app-exported PDF fixture. Multiply the quantity by the unit rate to check the amount. These rates were chosen for this fictional example; they are not advertised prices or current averages for Calgary, Alberta.

Brick joint repointing example · CAD Work item | Quantity | Unit rate | Amount |

Masonry condition and access review | 1 job | C$290.00 | C$290.00 |

Area protection | 1 job | C$180.00 | C$180.00 |

Joint preparation labour | 120 sq. ft. | C$11.70 | C$1,404.00 |

Mortar material allowance | 1 job | C$350.00 | C$350.00 |

Repointing labour | 120 sq. ft. | C$17.00 | C$2,040.00 |

Final cleaning and cleanup | 1 job | C$275.00 | C$275.00 |

Subtotal / example total | C$4,539.00 |

Two calculation checks:

- Joint preparation labour: 120 sq. ft. × C$11.70 = C$1,404.00.
- Repointing labour: 120 sq. ft. × C$17.00 = C$2,040.00.

The PDF shows a 0% tax entry, so the illustrated tax is C$0.00 and the total remains C$4,539.00. This only describes the example. Confirm the applicable tax treatment and any markup for the real job before issuing your estimate.

Assumptions that change the price

Mark the wall area and distinguish widespread joint deterioration from isolated patches. Wall square footage is a pricing basis here only because the repair density is described.

Loose units, movement or water damage may require work beyond mortar joints. Have the appropriate specialist confirm the wall is suitable for the proposed repair scope.

Material compatibility and finish appearance matter. Identify the selected mortar and sample approval process for the actual wall rather than assuming one mix suits every building.

Outside this example: No structural rebuilding, brick replacement, waterproofing design, high scaffolding or concealed damage correction.

Confirm site access, product selections and existing conditions in person. Check any trade or municipal requirements for the actual location, and record changes before issuing a final price. An allowance is a stated placeholder, not a promise to cover all work discovered later. If a selected product, quantity or hidden condition changes, update the affected line and explain the revision before proceeding.

Download the actual app PDF

The linked PDF was exported from Estimates for this fictional Canadian project. It carries the project scope, customer, work items, quantities, CAD rates and subtotal used in this table, plus a short note on tax, markup and one key exclusion. The detailed exclusions above remain important when adapting the example. Preview every PDF page, including the final totals and note.

(https://quicklyestimates.com/assets/guides/masonry-repointing/en-CA/estimate.pdf) Download brick joint repointing PDF ↓ (https://quicklyestimates.com/assets/guides/masonry-repointing/en-CA/estimate.pdf)Open PDF ↗ (https://quicklyestimates.com/assets/guides/masonry-repointing/en-CA/estimate.pdf)

Use the structure for a real job

- Replace Calgary, Alberta and the example scope with the actual site and customer details.
- Measure the work and confirm the product schedule with the client.
- Replace every fictional CAD rate with your own labour, supplier and subcontractor inputs.
- Check exclusions, approvals, tax, markup and the document’s validity period for the real project.
- Preview the final PDF and recheck the total before sharing.

- Mark measured repair area.
- Review brick and structural condition.
- Confirm compatible mortar and finish.
- Record access and cleaning constraints.

Common questions

Can all brick walls use one repointing price?

Joint density, access, condition and mortar selection vary. Measure and inspect the specific wall.

Does repointing stop every leak?

It should not be presented as a universal leak remedy. Identify and assess the water path separately.

For the planning steps behind this document, read the brick joint repointing estimating guide (https://quicklyestimates.com/en-ca/guides/how-to-estimate-masonry-repointing/).

Create your own estimate ↗ (https://quicklyestimates.com/en-ca/download/)

Actual app PDF: https://quicklyestimates.com/assets/guides/masonry-repointing/en-CA/estimate.pdf
Get the app: https://quicklyestimates.com/en-ca/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus