# Roof repair estimate example in Canada: Regina PDF

Inspect the Regina, Saskatchewan roof repair estimate with 7 line items, a C$1,801.00 illustrative total and an app-exported PDF. Match every quantity to the scope.

Canonical: https://quicklyestimates.com/en-ca/samples/roof-repair-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

This fictional Regina, Saskatchewan roof repair example has 7 itemized costs and a C$1,801.00 total before tax or markup. The PDF, quantities, unit rates and scope assumptions match the table below.

EXAMPLE AT A GLANCE

This fictional Regina, Saskatchewan roof repair example has 7 itemized costs and a C$1,801.00 total before tax or markup. The PDF, quantities, unit rates and scope assumptions match the table below.

Use this completed roof repair document to see how a specific job becomes a client-facing estimate. The project, business, customer and amounts are fictional. For the localized shingle repair in Regina, Saskatchewan, the example uses the measured trade units shown in its PDF. Residential jobs may mix square feet, linear feet, counts and supplier units; keep each line’s measurement basis visible. Check exposure, access, drainage and any concealed water damage at the property. Confirm the selected product and local approval requirements before setting the final scope. The figures are fictional CAD inputs, not a local price survey.

Download example PDF ↓ (https://quicklyestimates.com/assets/guides/roof-repair/en-CA/estimate.pdf)Read the matching estimating guide → (https://quicklyestimates.com/en-ca/guides/how-to-estimate-roof-repair/)

Project scope: Localized shingle repair

Price a localized 100-square-foot shingle repair area after inspection. Include access/setup allowance, removal of affected shingles, replacement shingle and underlayment allowances, one scoped flashing repair, installation and disposal. No whole-roof replacement.

Example location Regina, Saskatchewan

Prepared by Cedar & Beam Builders · fictional business

Prepared for Jordan Taylor · fictional client

Issued / valid through September 25 / October 25, 2026

Measure this work on the actual property before using any quantity. The illustration separates supplied products or materials from installation where the selection could change. A client should be able to compare each line with the agreed work, the selected products and the limits recorded in the notes.

The 7 itemized costs in Canadian dollars

Every row below is taken from the corresponding app-exported PDF fixture. Multiply the quantity by the unit rate to check the amount. These rates were chosen for this fictional example; they are not advertised prices or current averages for Regina, Saskatchewan.

Roof repair example · CAD Work item | Quantity | Unit rate | Amount |

Access and setup allowance | 1 job | C$350.00 | C$350.00 |

Affected shingle removal | 100 sq. ft. | C$2.10 | C$210.00 |

Replacement shingles allowance | 1.2 square | C$195.00 | C$234.00 |

Underlayment and fasteners | 1 job | C$132.00 | C$132.00 |

Scoped flashing repair allowance | 1 job | C$250.00 | C$250.00 |

Repair installation labour | 100 sq. ft. | C$4.85 | C$485.00 |

Debris removal | 1 job | C$140.00 | C$140.00 |

Subtotal / example total | C$1,801.00 |

Two calculation checks:

- Affected shingle removal: 100 sq. ft. × C$2.10 = C$210.00.
- Replacement shingles allowance: 1.2 square × C$195.00 = C$234.00.

The PDF shows a 0% tax entry, so the illustrated tax is C$0.00 and the total remains C$1,801.00. This only describes the example. Confirm the applicable tax treatment and any markup for the real job before issuing your estimate.

Assumptions that change the price

Identify the roof section and the problem the scoped work addresses. Keep inspection observations and the proposed repair distinct. A customer should be able to understand why these components appear in the estimate rather than seeing only a generic roof repair charge.

A roofing square represents 100 square feet of area. This example repairs 100 square feet but allows 1.2 squares of replacement shingles. The purchase allowance must be checked against the actual product, pattern and repair extent.

Name the included flashing task and its location instead of suggesting that every penetration is covered. If investigation reveals a different source of water entry, revise the repair plan and estimate before extending work beyond the original scope.

Outside this example: No whole-roof replacement, decking replacement, structural repairs, hazardous-material handling or guarantee of conditions outside the inspected repair scope.

Check exposure, access, drainage and any concealed water damage at the property. Confirm the selected product and local approval requirements before setting the final scope. An allowance is a stated placeholder, not a promise to cover all work discovered later. If a selected product, quantity or hidden condition changes, update the affected line and explain the revision before proceeding.

Download the actual app PDF

The linked PDF was exported from Estimates for this fictional Canadian project. It carries the project scope, customer, work items, quantities, CAD rates and subtotal used in this table, plus a short note on tax, markup and one key exclusion. The detailed exclusions above remain important when adapting the example. Preview every PDF page, including the final totals and note.

(https://quicklyestimates.com/assets/guides/roof-repair/en-CA/estimate.pdf) Download roof repair PDF ↓ (https://quicklyestimates.com/assets/guides/roof-repair/en-CA/estimate.pdf)Open PDF ↗ (https://quicklyestimates.com/assets/guides/roof-repair/en-CA/estimate.pdf)

Use the structure for a real job

- Replace Regina, Saskatchewan and the example scope with the actual site and customer details.
- Measure the work and confirm the product schedule with the client.
- Replace every fictional CAD rate with your own labour, supplier and subcontractor inputs.
- Check exclusions, approvals, tax, markup and the document’s validity period for the real project.
- Preview the final PDF and recheck the total before sharing.

- Identify the inspected repair area.
- Specify product and appearance assumptions.
- Name the included flashing task.
- Explain how concealed damage changes the estimate.

Common questions

What is a roofing square in an estimate?

It is an area unit equal to 100 square feet. Label it clearly so it is not confused with one square foot or one bundle of shingles.

Can a small roof repair estimate include decking replacement?

Include it only when assessed and quantified, or label it as a separate allowance. Do not imply unknown decking damage is covered by a surface repair price.

For the planning steps behind this document, read the roof repair estimating guide (https://quicklyestimates.com/en-ca/guides/how-to-estimate-roof-repair/).

Create your own estimate ↗ (https://quicklyestimates.com/en-ca/download/)

Actual app PDF: https://quicklyestimates.com/assets/guides/roof-repair/en-CA/estimate.pdf
Get the app: https://quicklyestimates.com/en-ca/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus