# How to estimate tarmac driveway sealing for a UK job

Plan the scope, check quantities and review an itemised tarmac driveway sealing estimate in pounds with a matching UK example PDF.

Canonical: https://quicklyestimates.com/en-gb/guides/how-to-estimate-asphalt-driveway-sealing/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

Use a measured 111 sq m residential driveway example to separate the scope, quantities, product allowances and labour, then review the £1,565.81 illustrative PDF before making your own estimate.

THE SHORT ANSWER

Estimate tarmac sealing from measured pavement area, preparation and defined crack work. Separate routine coating from pavement repair, and avoid promising that a sealer corrects structural defects.

Use this fictional 111 sq m residential driveway in Sheffield to plan the estimate. The agreed work is: Clean and seal 111 sq m of accessible tarmac driveway after a condition review. Include surface preparation, 24.4 metres of limited crack-fill allowance, coating material allowance, application and clean-up. No resurfacing or pothole repair. The matching tarmac driveway sealing example and PDF (https://quicklyestimates.com/en-gb/samples/asphalt-driveway-sealing-estimate/) shows the same inputs. These quantities and rates are teaching examples; use your own site measurements, product selections, supplier information and labour figures for a customer job.

1. Measure the coating footprint

Sketch the driveway, including branches and excluded surfaces. The 111 sq m number is tarmac receiving coating, not lot or property area.

2. Assess visible condition

Record cracks, holes and failed areas. This example has a limited measured crack-fill line; potholes or resurfacing are distinct repairs.

3. State the selected system

Confirm product, preparation and application assumptions with the supplier and site conditions. The material allowance is fictional, not a coverage recommendation.

4. Explain access and curing arrangements

Agree vehicle access, adjacent-surface protection and handoff instructions for the selected product. Keep scheduling conditional on weather and product requirements.

Calculate the measured lines

The PDF uses 6 separate items. For example, Driveway cleaning and preparation is 111 sq m × £2.41 = £267.51; Limited crack filling is 24.4 metres × £9.20 = £224.48. Check that each unit describes the work being priced: area for a surface, metres for a run, and a count or defined lump sum for a discrete task. A material purchase allowance can differ from the installed quantity when product sizes, cuts or layout require it.

Adding the 6 rounded line amounts gives £1,565.81 . The example PDF uses a 0% tax input and no markup; those settings do not determine how to price or treat an actual job. Do not copy the rates as a local price guide.

Check the scope before sending

- Measure pavement area.
- Count and locate cracks.
- Confirm product and condition suitability.
- Agree access and protection.

Outside the base scope: No pothole repair, resurfacing, base repair, oil-remediation guarantee or coating of concrete surfaces.

Confirm the site address, selected products, access, quantities, customer details and validity date. If opening the work reveals a different condition, record the change and update the relevant line before asking the customer to approve the revised work. Preview every page of the PDF so the written scope, line amounts and total tell the same story.

Common questions

Will sealing repair a failed driveway?

No. Assess failed pavement separately and quote repair or replacement where needed.

Should crack filling be one allowance?

A measured length and stated repair limit make the allowance clearer than an undefined promise to fill all cracks.

(https://quicklyestimates.com/en-gb/samples/asphalt-driveway-sealing-estimate/) Preview of the matching estimate PDF · View the matching example (https://quicklyestimates.com/en-gb/samples/asphalt-driveway-sealing-estimate/)

FROM SITE NOTES TO AN ITEMISED PDF

Make your own tarmac driveway sealing estimate.

Enter the scope in Estimates on iPhone or Android, edit each quantity and rate in pounds, add your business and customer details, and review the PDF before sharing it.

Create an estimate ↗ (https://quicklyestimates.com/en-gb/download/)Explore the tarmac driveway sealing PDF example → (https://quicklyestimates.com/en-gb/samples/asphalt-driveway-sealing-estimate/)

Get the app: https://quicklyestimates.com/en-gb/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus