# Utility sink installation estimate example and PDF

Download an app-generated utility sink installation estimate PDF for one new utility-room sink. Review 7 itemized lines, a $1,685.00 fictional subtotal and clear exclusions.

Canonical: https://quicklyestimates.com/en-us/samples/utility-sink-installation-estimate/
Author: Estimates editorial team
Published: 2026-09-25
Updated: 2026-09-25

A utility sink installation example for one new utility-room sink contains 7 itemized lines totaling $1,685.00 before tax or markup. The actual app PDF, measurement basis, project boundaries and a matching how-to guide are available here; every rate is fictional.

EXAMPLE AT A GLANCE

A utility sink installation example for one new utility-room sink contains 7 itemized lines totaling $1,685.00 before tax or markup. The actual app PDF, measurement basis, project boundaries and a matching how-to guide are available here; every rate is fictional.

Download itemized PDF ↓ (https://quicklyestimates.com/assets/guides/utility-sink-installation/en-US/estimate.pdf)How to estimate this job → (https://quicklyestimates.com/en-us/guides/how-to-estimate-utility-sink-installation/)

What this example covers

Install one selected utility sink near existing suitable water and drain services, with faucet, trap and wall or floor support.

Use this example to see a complete document for one new utility-room sink . The brief is tied to Phoenix, Arizona for a plausible project setting; the amounts are fictional input values and do not represent local market prices. The estimating guide (https://quicklyestimates.com/en-us/guides/how-to-estimate-utility-sink-installation/) explains the decisions behind these lines.

Prepared by Cedar & Beam Builders · fictional business

Prepared for Jordan Taylor · fictional customer

Example project One new utility-room sink

Issued / valid through September 25, 2026 / October 25, 2026

Itemized utility sink installation example

These are the same quantities and unit prices used by the downloadable app PDF. A cost line can represent measured work, a selected product allowance or a distinct site task. Check which interpretation applies before replacing any amount.

Utility sink installation example — USD Work item | Quantity | Unit price | Amount |

Site measurement and protection | 1 job | $135.00 | $135.00 |

Sink product allowance | 1 each | $390.00 | $390.00 |

Faucet allowance | 1 each | $180.00 | $180.00 |

Waste and supply fittings | 1 job | $220.00 | $220.00 |

Support and mounting | 1 job | $280.00 | $280.00 |

Water and drain connection | 1 job | $360.00 | $360.00 |

Leak check and cleanup | 1 job | $120.00 | $120.00 |

Subtotal / example total | $1,685.00 |

How the subtotal is calculated

The example line for site measurement and protection is 1 job × $135.00 = $135.00. This line is one part of the complete 7-item estimate and uses a fictional unit rate.

The document sums the rounded line amounts to $1,685.00 . Tax and markup are not included; a zero tax field in a sample document does not mean a real project is tax-exempt. Confirm the actual treatment for the job you are quoting.

Measurement to verify: Measure sink footprint, service route, fixing support and working clearance. Selection to verify: Separate sink, faucet and connection materials from fit-out labor.

Assumptions and exclusions

Confirm drain fall and shutoff before fixing the sink.

Outside the stated scope: No new room drainage, cabinet build-out or floor repair.

Hidden pipework or weak wall support can change the mounting method. If the scope changes after a client reviews the estimate, update the relevant quantities, allowances and written exclusions before sharing a revised PDF.

Download the actual app PDF

The downloadable document was exported from Estimates using the fictional business, client, scope and cost lines shown above. The preview is its first page. Review the full PDF before using its layout or wording as a reference for your own estimate.

(https://quicklyestimates.com/assets/guides/utility-sink-installation/en-US/estimate.pdf) Download utility sink installation PDF ↓ (https://quicklyestimates.com/assets/guides/utility-sink-installation/en-US/estimate.pdf)Open PDF (https://quicklyestimates.com/assets/guides/utility-sink-installation/en-US/estimate.pdf)

Build your own version

- Write the actual job boundary and measured quantities. Measurement basis to check: Measure sink footprint, service route, fixing support and working clearance.
- Confirm products, access and handoff responsibilities. Selection decision to record: Separate sink, faucet and connection materials from fit-out labor.
- Replace every fictional rate with your own supplier, labor and subcontractor inputs.
- Add business and client details, set the appropriate tax and markup, then preview all PDF pages.
- Share the estimate with its exclusions and a clear validity date.

- Measure sink footprint, service route, fixing support and working clearance.
- Separate sink, faucet and connection materials from fit-out labor.
- Confirm drain fall and shutoff before fixing the sink.
- Hidden pipework or weak wall support can change the mounting method.

Questions about this estimate

Which quantity controls this utility sink installation estimate?

Measure sink footprint, service route, fixing support and working clearance.

When should this utility sink installation quote be revised?

Hidden pipework or weak wall support can change the mounting method. No new room drainage, cabinet build-out or floor repair.

TURN THIS EXAMPLE INTO YOUR OWN ESTIMATE

Build a utility sink installation estimate for your project

Use Estimates on iPhone or Android to draft a scope with AI assistance or enter each line yourself. Review quantities, rates, exclusions, and client details before exporting a PDF. The example is free to inspect; some app features may require an in-app purchase.

Create an estimate ↗ (https://quicklyestimates.com/en-us/download/)Read the estimating method → (https://quicklyestimates.com/en-us/guides/how-to-estimate-utility-sink-installation/)

Continue with a related estimate

- Utility sink installation material and labor takeoff guide (https://quicklyestimates.com/en-us/guides/how-to-estimate-utility-sink-installation/)
- Rainwater collection tank installation estimate example (https://quicklyestimates.com/en-us/samples/rainwater-tank-installation-estimate/)
- Create your first contractor estimate (https://quicklyestimates.com/en-us/guides/create-a-contractor-estimate/)

Actual app PDF: https://quicklyestimates.com/assets/guides/utility-sink-installation/en-US/estimate.pdf
Get the app: https://quicklyestimates.com/en-us/download/
App Store (iPhone): https://apps.apple.com/app/id6740389403
Google Play (Android): https://play.google.com/store/apps/details?id=com.uzel.contractorplus