Floors & finishes · Adelaide, South Australia · AUD

Interior door installation estimate example: Adelaide, South Australia PDF and itemised costs

Explore an interior door installation estimate example for Adelaide, South Australia: 6 itemised AUD lines and a fictional total of A$2,093.00, with metric measurements, scope notes and an app-exported PDF.

EXAMPLE AT A GLANCE

This fictional interior door installation quote for Adelaide, South Australia has 6 itemised lines totalling A$2,093.00. Review the exact metric quantities and scope, then open the matching app-exported PDF. The 0% tax entry is only an example input.

The three pre-hung interior doors scope

Replace three pre-hung interior doors in existing suitable openings. Include removal, a standard door-unit allowance, installation labour, casing allowance, owner-supplied handle fitting and cleanup. Painting excluded.

This is an original fictional job set in Adelaide, South Australia. The location gives the example a recognisable setting; the rates are made-up inputs and do not describe local prices. Use the matching estimating guide to check what should be measured, selected or excluded on a real job.

Prepared by
Harbour & Gum Projects · fictional business
Prepared for
Alex Morgan · fictional customer
Example location
Adelaide, South Australia
Issued / valid through
25 September 2026 / 25 October 2026

Itemised interior door installation example

Each amount is its quantity multiplied by its AUD unit rate, rounded to cents. These 6 entries match the fixture used to make the PDF. Metric surface and length units describe the priced work, not a conversion rule for another property.

Interior door installation example — AUD
Work itemQuantityUnit rateAmount
Existing door-unit removal3 eachA$63.00A$189.00
Pre-hung interior door allowance3 eachA$266.00A$798.00
Door-unit installation labour3 eachA$210.00A$630.00
Casing and consumables allowance3 eachA$77.00A$231.00
Owner-supplied handle fitting3 eachA$35.00A$105.00
Disposal and cleanup1 jobA$140.00A$140.00
Subtotal / example totalA$2,093.00

Calculation check: 3 each × A$63.00 = A$189.00; 3 each × A$266.00 = A$798.00. The demonstration tax field is 0%, so the displayed total stays A$2,093.00. Determine tax and markup for your own work instead of using this input as guidance.

Assumptions and scope boundaries

The price assumes suitable existing openings. If correction or resizing is required, list it separately after inspection. A standard installation line should not imply that damaged framing or extensive wall repair is included.

Outside this example: No opening resizing, framing repair, exterior doors, specialty assemblies, painting or surrounding wall refinishing.

Selections, access or concealed conditions that differ from this scope require a revised quantity, allowance or separate line. The example deliberately separates them so the client can see what has and has not been priced.

Open the app-exported PDF

The PDF is a completed example exported from Estimates using this job data, fictional parties and the line amounts above. Read all pages to check notes as well as the total. The preview is the first page.

First page of the interior door installation estimate PDF

Adapt this example to your next job

  1. Replace the example location and project description with the actual site and client's requested result.
  2. Measure the work in the units shown, revising each quantity and product allowance to suit your plans and site inspection.
  3. Obtain your own supplier and labour inputs, then check access, protection, disposal and any specialist trade boundaries.
  4. Record exclusions and choices that remain open; review markup and tax for the actual quote.
  5. Preview every page of the PDF and check the item totals before sharing it.
  • Confirm sizes, swing directions and styles.
  • Verify slab-only versus pre-hung replacement.
  • Assign hardware and casing responsibility.
  • State painting and wall-repair exclusions.

Common questions about interior door installation

Does a door installation estimate include the door?

Not always. Label a labour-only quote clearly, or list the door-unit material allowance separately as this sample does.

Can I use one price for all interior doors?

Only when the openings and scope are comparable. Different sizes, conditions, products and finishing requirements should be identified before grouping them.

FROM SCOPE TO PDF

Make your own interior door installation estimate.

Describe the actual job in Estimates on iPhone or Android, then review every quantity, rate and scope note. Add your business and client details, check the document and share an itemised PDF. Example amounts are fictional, and some app features may require an in-app purchase.

Plain-text version · Browse all samples

Less paperwork. More job done.

Your next estimate can start on site.

Download on the App StoreGet it on Google Play