Electrical & low voltage · Edmonton, Alberta · CAD

Home office data cabling estimate example and PDF in Canada

Inspect an app-exported home office data cabling estimate for two wired data outlets in Edmonton, Alberta. Check 7 CAD line items, a C$2,415.00 fictional total and the scope assumptions.

EXAMPLE AT A GLANCE

This fictional Edmonton, Alberta home office data cabling example contains 7 itemized costs totaling C$2,415.00 before tax or markup. The app-exported PDF uses the exact quantities and CAD rates shown in the table, with scope limits explained below.

Project scope: Two wired data outlets

Install two wired data outlets in a home office from an accessible network point, with a defined cable route and tested terminations.

The fictional project is set in Edmonton, Alberta. Cedar & Beam Builders and Jordan Taylor are example names, not a contractor and client case study. The matching guide explains how measurement, product selection and site conditions affect the estimate.

Location
Edmonton, Alberta
Prepared by
Cedar & Beam Builders · fictional business
Prepared for
Jordan Taylor · fictional client
Issued / valid through
September 25 / October 25, 2026

The 7 CAD cost lines

The table uses the exact items, quantities and unit rates in the app-exported PDF. Multiply each quantity by its rate to check the amount. These chosen figures demonstrate the document; they are not surveyed prices or suggested rates for Edmonton, Alberta.

Home office data cabling example · CAD
Work itemQuantityUnit rateAmount
Route survey and protection1 jobC$210.00C$210.00
Data cable allowance150 linear ft.C$2.60C$390.00
Faceplate and jack allowance2 eachC$125.00C$250.00
Containment allowance1 jobC$200.00C$200.00
Cable pulling labour8 hoursC$100.00C$800.00
Termination and test2 eachC$220.00C$440.00
Patch record and cleanup1 jobC$125.00C$125.00
Illustrative subtotalC$2,415.00

Check the arithmetic

  • Data cable allowance: 150 linear ft. × C$2.60 = C$390.00.
  • Faceplate and jack allowance: 2 each × C$125.00 = C$250.00.

The rounded line amounts add to C$2,415.00. The PDF's tax field is 0%, so its illustrated total stays C$2,415.00 before any markup. The sample shows 0% tax only to make the arithmetic visible. Determine any applicable GST, HST or PST and markup for the actual work before sharing a quote.

Measurement to verify: Measure each cable run and confirm wall route, device locations and patch-panel access. Product decision: Specify cable category, faceplates and termination hardware separately.

The data cable allowance line uses 150 linear ft., approximately 45.72 m. Check the route, cuts and supplier unit before setting a real quantity.

Assumptions and exclusions

Agree pathway and surface finish before cutting walls.

Outside this example: No internet subscription, network switch upgrade or wall repaint.

Blocked cavities or unavailable network port capacity change the route or equipment. Have the actual supply route, mounting and testing reviewed by the qualified person doing the work. Confirm any approval or inspection requirements for the project address before issuing a final price. Confirm a change and update the estimate before adding work that was not in the base scope.

Download the actual app PDF

The PDF was exported from Estimates for this fictional Canadian job. It carries a concise version of the project scope, plus the same customer, cost lines, CAD amounts and total used here. Its note covers the fictional tax setting and the brief's full exclusion sentence; the article records additional assumptions that do not fit in that PDF note.

First page of the fictional Edmonton, Alberta home office data cabling PDF estimate

Build the next estimate from your own inputs

  1. Measure the actual site and describe the work boundary in plain language.
  2. Confirm the selected products, access and handoff responsibilities with the client.
  3. Replace every fictional rate with your own labour, supplier and subcontractor figures.
  4. Check the relevant GST, HST or PST treatment and markup for the job without copying this sample's zero entry.
  5. Preview each PDF page, total and exclusion note before sharing.
  • Measure each cable run and confirm wall route, device locations and patch-panel access.
  • Specify cable category, faceplates and termination hardware separately.
  • Agree pathway and surface finish before cutting walls.
  • Blocked cavities or unavailable network port capacity change the route or equipment.

Questions about this estimate

Which quantity controls this home office data cabling estimate?

Measure each cable run and confirm wall route, device locations and patch-panel access.

When should this home office data cabling quote be revised?

Blocked cavities or unavailable network port capacity change the route or equipment. No internet subscription, network switch upgrade or wall repaint.

MAKE THE NEXT ESTIMATE YOUR OWN

Build a home office data cabling estimate.

Enter the job scope in Estimates on iPhone or Android or start from an AI-assisted draft. Check every quantity, rate, allowance, client detail and note before exporting the PDF. Some app features may require an in-app purchase.

Plain-text version · Browse all samples

Make the next estimate clearer.

Your scope and your pricing, together in one PDF.

Download on the App StoreGet it on Google Play