EXAMPLE AT A GLANCE
This fictional Kingston, Ontario storefront glass panel replacement example contains 7 itemized costs totaling C$10,515.00 before tax or markup. The app-exported PDF uses the exact quantities and CAD rates shown in the table, with scope limits explained below.
Project scope: One damaged storefront pane
Replace one damaged storefront glass panel within a suitable existing frame, using selected safety glazing after specialist measurement.
The fictional project is set in Kingston, Ontario. Cedar & Beam Builders and Jordan Taylor are example names, not a contractor and client case study. The matching guide explains how measurement, product selection and site conditions affect the estimate.
- Location
- Kingston, Ontario
- Prepared by
- Cedar & Beam Builders · fictional business
- Prepared for
- Jordan Taylor · fictional client
- Issued / valid through
- September 25 / October 25, 2026
The 7 CAD cost lines
The table uses the exact items, quantities and unit rates in the app-exported PDF. Multiply each quantity by its rate to check the amount. These chosen figures demonstrate the document; they are not surveyed prices or suggested rates for Kingston, Ontario.
| Work item | Quantity | Unit rate | Amount |
|---|---|---|---|
| Specialist measure and specification | 1 job | C$390.00 | C$390.00 |
| Temporary opening protection | 1 job | C$590.00 | C$590.00 |
| Broken glass removal | 1 each | C$505.00 | C$505.00 |
| Glazing product allowance | 65 sq. ft. | C$77.00 | C$5,005.00 |
| Glazing installation | 65 sq. ft. | C$53.00 | C$3,445.00 |
| Seal and edge material | 1 job | C$320.00 | C$320.00 |
| Final safety clean | 1 job | C$260.00 | C$260.00 |
| Illustrative subtotal | C$10,515.00 | ||
Check the arithmetic
- Broken glass removal: 1 each × C$505.00 = C$505.00.
- Glazing product allowance: 65 sq. ft. × C$77.00 = C$5,005.00.
The rounded line amounts add to C$10,515.00. The PDF's tax field is 0%, so its illustrated total stays C$10,515.00 before any markup. The sample shows 0% tax only to make the arithmetic visible. Determine any applicable GST, HST or PST and markup for the actual work before sharing a quote.
Measurement to verify: Measure visible opening and rebate, glazing specification, access and temporary security need. Product decision: Separate glass fabrication, temporary boarding and glazing labour.
The glazing product allowance line uses 65 sq. ft., approximately 6.04 m². Keep the actual site measurement and the supplier’s selling unit together when you replace this quantity.
Assumptions and exclusions
Secure the opening, confirm glass specification and supplier lead time before fitting.
Outside this example: No storefront frame replacement, automatic door repair or emergency call-out guarantee.
Frame damage or a non-standard glazing system changes the replacement. Inspect the existing substrate, access and product selections at the property. Check any local trade or municipal requirements that apply and record unresolved conditions before preparing the final client document. Confirm a change and update the estimate before adding work that was not in the base scope.
Download the actual app PDF
The PDF was exported from Estimates for this fictional Canadian job. It carries a concise version of the project scope, plus the same customer, cost lines, CAD amounts and total used here. Its note covers the fictional tax setting and the brief's full exclusion sentence; the article records additional assumptions that do not fit in that PDF note.
Build the next estimate from your own inputs
- Measure the actual site and describe the work boundary in plain language.
- Confirm the selected products, access and handoff responsibilities with the client.
- Replace every fictional rate with your own labour, supplier and subcontractor figures.
- Check the relevant GST, HST or PST treatment and markup for the job without copying this sample's zero entry.
- Preview each PDF page, total and exclusion note before sharing.
- Measure visible opening and rebate, glazing specification, access and temporary security need.
- Separate glass fabrication, temporary boarding and glazing labour.
- Secure the opening, confirm glass specification and supplier lead time before fitting.
- Frame damage or a non-standard glazing system changes the replacement.
Questions about this estimate
Which quantity controls this storefront glass panel replacement estimate?
Measure visible opening and rebate, glazing specification, access and temporary security need.
When should this storefront glass panel replacement quote be revised?
Frame damage or a non-standard glazing system changes the replacement. No storefront frame replacement, automatic door repair or emergency call-out guarantee.
MAKE THE NEXT ESTIMATE YOUR OWN
Build a storefront glass panel replacement estimate.
Enter the job scope in Estimates on iPhone or Android or start from an AI-assisted draft. Check every quantity, rate, allowance, client detail and note before exporting the PDF. Some app features may require an in-app purchase.
