EXAMPLE AT A GLANCE
This fictional Liverpool garage wall storage fitout project has 7 itemised lines and an illustrative £4,266.13 total. The app-exported PDF, first-page preview, measurement basis, scope boundaries and matching UK estimating guide let you inspect every quantity and rate.
What this example covers
This fictional job is set in Liverpool and concerns one two-wall garage storage run. Fit modular shelves, cabinets and a work surface along two sound garage walls while retaining vehicle clearance. The estimate is a bounded document: the customer should be able to compare the described work with its measured lines, product allowances and exclusions. The matching UK guide explains how to prepare those inputs.
- Prepared by
- Cedar & Beam Builders · fictional business
- Prepared for
- Jordan Taylor · fictional customer
- Example location
- Liverpool, UK
- Issued / valid through
- 25 September 2026 / 25 October 2026
Itemised garage wall storage fitout example
These 7 lines reproduce the app-exported PDF exactly. The largest is Storage fitting labour at £1,008.00; this is one fictional component, not a typical price. Read each quantity with its unit: area, length, time, count and lump sum describe different work and must not be interchanged.
| Work item | Quantity | Unit rate | Amount |
|---|---|---|---|
| Garage layout and protection | 1 lump sum | £160.00 | £160.00 |
| Wall-rail allowance | 9.1 metres | £73.50 | £668.85 |
| Cabinet allowance | 3 each | £256.00 | £768.00 |
| Shelf material allowance | 11.6 metres | £84.00 | £974.40 |
| Worktop allowance | 2.4 metres | £236.20 | £566.88 |
| Storage fitting labour | 18 hours | £56.00 | £1,008.00 |
| Level check and clean-up | 1 lump sum | £120.00 | £120.00 |
| Illustrative total | £4,266.13 | ||
The table separates the named product or material allowances from labour and site tasks wherever the scope needs that distinction. Before replacing a rate, check whether the product allowance includes delivery, waste, fixings and the selected specification.
How the total is calculated
Wall-rail allowance is 9.1 metres × £73.50 = £668.85. Cabinet allowance is 3 each × £256.00 = £768.00. The other lines follow the same calculation and sum to £4,266.13. Each fixture line lands on an exact penny, so the native PDF total equals the sum of the displayed line amounts.
Measurement to check: Measure clear wall runs, floor slope, door sweep and storage loads. Selection to check: Separate selected cabinets, shelf rails and worktop from fitting labour. The 0% tax field and zero markup are example document inputs, not an instruction for a live quote. Decide the correct settings for your own business and job.
Assumptions and exclusions
Lay out storage at full scale before fixing to suitable backing.
Outside this stated scope: No electrical work, floor coating or structural wall reinforcement.
Hidden services or insufficient backing change anchors and cabinet positions. A changed condition should lead to a newly measured quantity, explicit revised allowance or separately agreed task. Keep the customer informed of which figure changed and why before producing another PDF.
Download the app PDF
The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines above. Its first page appears below. Download the complete PDF to inspect every entry and its presentation; no listed rate is a current Liverpool market claim.
Make an estimate for your own job
- Write the actual work boundary and exclusions. Use this measurement basis: Measure clear wall runs, floor slope, door sweep and storage loads.
- Confirm the selected products and access conditions. Record this selection decision: Separate selected cabinets, shelf rails and worktop from fitting labour.
- Replace every fictional product, labour and subcontractor rate with your own evidence.
- Check line extensions, total, tax and markup settings, customer details and validity date.
- Preview every PDF page before sharing the estimate with the customer.
- Measure clear wall runs, floor slope, door sweep and storage loads.
- Separate selected cabinets, shelf rails and worktop from fitting labour.
- Lay out storage at full scale before fixing to suitable backing.
- Hidden services or insufficient backing change anchors and cabinet positions.
Read the matching estimating guide for the project-specific measurement and work sequence.
Questions about this job
Which quantity controls this garage wall storage fitout estimate?
Measure clear wall runs, floor slope, door sweep and storage loads.
When should this garage wall storage fitout quote be revised?
Hidden services or insufficient backing change anchors and cabinet positions. No electrical work, floor coating or structural wall reinforcement.
MAKE THE EXAMPLE YOUR OWN
Build a garage wall storage fitout estimate
Use Estimates on iPhone or Android to enter your measured scope and line items. Review the result carefully and export a PDF for the actual job.
