THE SHORT ANSWER
Estimate localised driveway repair from the actual defects, removed area, repair material and joint work. Explain that patch appearance and performance depend on the existing slab condition.
This Australian walkthrough uses a fictional three localised driveway patches in Newcastle, New South Wales. The matching concrete driveway repair estimate example shows the same item quantities and amounts in an app-exported PDF. Measure your own site and replace the example rates before issuing a client quote.
1. Map each defect
Measure the three patch areas and record cracks, settlement or water evidence nearby. A 2.79 m² sum does not imply the entire driveway is being restored.
For this example, the agreed starting scope is: Repair three nonstructural surface defects totaling 2.79 m² on an accessible concrete driveway after site review. Include protection, limited removal, repair-material allowance, patch placement and finishing, joint touch-up and cleanup. No full slab replacement or structural stabilization. A change to a listed surface, product or access assumption should trigger a revised line or allowance.
2. Assess whether patching fits
The sample assumes local nonstructural defects. Major movement, failed base or widespread deterioration requires a different repair plan.
3. Separate removal and placement
Both tasks use the 2.79 m² repair area but have different labour lines. Identify the selected repair material and its installation requirements for the actual job.
4. Set appearance expectations
A new patch can differ from aged concrete. State finishing, joint touch-up, debris handling and any limits on colour matching.
Worked concrete driveway repair calculation
Two checkable lines from the example are 2.79 m² × A$181.00 = A$504.99; 2.79 m² × A$362.00 = A$1,009.98. The full 7-line estimate totals A$2,832.06 with the demonstration tax input at 0%. The amount is a fictional scenario, not an Australian market rate or a recommended selling price.
Material purchasing and installed quantities may differ. For your own estimate, use the actual takeoff, supplier prices, labour plan, access and disposal requirements. Decide how overhead, profit and the applicable tax treatment affect your final quote; do not copy the example's zero tax setting.
Before you share the estimate
- Measure and photograph each patch.
- Review slab movement and base condition.
- Select repair material and finish.
- State appearance and curing assumptions.
Scope boundary in this example: No full-slab replacement, base repair, structural stabilization, colour-match guarantee or drainage redesign.
Confirm the client details and location, item descriptions, measured units, total and validity date. If opening up the work reveals a different condition, document the changed scope and price before proceeding.
Common questions about concrete driveway repair
Can a patch fix a settled driveway?
Settlement needs its cause and repair approach assessed separately. This sample is for defined local surface defects.
Will a patch match old concrete?
A visual match should not be assumed. Describe the chosen finish and its likely difference from aged material.
FROM SCOPE TO PDF
Make your own concrete driveway repair estimate.
Describe the actual job in Estimates on iPhone or Android, then review every quantity, rate and scope note. Add your business and client details, check the document and share an itemised PDF. Example amounts are fictional, and some app features may require an in-app purchase.
