THE SHORT ANSWER
Estimate localized driveway repair from the actual defects, removed area, repair material and joint work. Explain that patch appearance and performance depend on the existing slab condition.
This guide follows a fictional three localized driveway patches in Charlottetown, Prince Edward Island. The linked concrete driveway repair PDF example shows the scope and 7 separate costs in Canadian dollars. Treat it as a worked document, then use measurements, supplier quotes and labour inputs from your own project.
1. Map each defect
Measure the three patch areas and record cracks, settlement or water evidence nearby. A 30-square-foot sum does not imply the entire driveway is being restored.
2. Assess whether patching fits
The sample assumes local nonstructural defects. Major movement, failed base or widespread deterioration requires a different repair plan.
3. Separate removal and placement
Both tasks use the 30-square-foot repair area but have different labour lines. Identify the selected repair material and its installation requirements for the actual job.
4. Set appearance expectations
A new patch can differ from aged concrete. State finishing, joint touch-up, debris handling and any limits on colour matching.
Review the Canadian project address
For the three localized driveway patches in Charlottetown, Prince Edward Island, the example uses the measured trade units shown in its PDF. Residential jobs may mix square feet, linear feet, counts and supplier units; keep each line’s measurement basis visible. Check access, grades, drainage and seasonal site conditions. Confirm any property-line, utility, design or municipal requirements that apply before committing to the work. The figures are fictional CAD inputs, not a local price survey.
Describe which products the customer supplies and which the contractor supplies. State how any site condition outside the visible scope will be assessed and priced. Do not copy an allowance from another city or assume a sample’s tax entry establishes the treatment for this client.
Work through the concrete driveway repair quantities
The matching PDF lets the client check each extension of quantity and unit rate. For this example, two useful checks are:
- Limited concrete removal: 30 sq. ft. × C$17.00 = C$510.00.
- Patch placement and finish labour: 30 sq. ft. × C$34.00 = C$1,020.00.
Adding all 7 lines gives a C$2,870.40 illustrative subtotal. The PDF records 0% tax and C$2,870.40 as its total, before any markup. These are chosen sample inputs, not prices observed in Charlottetown, Prince Edward Island. The measurement basis matters as much as the rate: a material purchase allowance may be larger than the installed area, while a fixture count is not interchangeable with hours of labour.
Check the scope before sending
- Measure and photograph each patch.
- Review slab movement and base condition.
- Select repair material and finish.
- State appearance and curing assumptions.
Outside the illustrated scope: No full-slab replacement, base repair, structural stabilization, colour-match guarantee or drainage redesign.
Check the business and client names, property location, dates, quantities, unit rates and notes. Confirm tax, markup and any required approvals for the actual job. If selections or site conditions are unresolved, label the line as an allowance and explain how it will be updated.
Common questions
Can a patch fix a settled driveway?
Settlement needs its cause and repair approach assessed separately. This sample is for defined local surface defects.
Will a patch match old concrete?
A visual match should not be assumed. Describe the chosen finish and its likely difference from aged material.
Open the itemized concrete driveway repair example and its app-exported PDF to see these decisions presented to a client. You can adapt the structure while replacing every fictional project input with your own.
