Masonry · Hobart, Tasmania · AUD

Brick joint repointing estimate example: Hobart, Tasmania PDF and itemised costs

Explore a brick joint repointing estimate example for Hobart, Tasmania: 6 itemised AUD lines and a fictional total of A$4,880.34, with metric measurements, scope notes and an app-exported PDF.

EXAMPLE AT A GLANCE

This fictional brick joint repointing quote for Hobart, Tasmania has 6 itemised lines totalling A$4,880.34. Review the exact metric quantities and scope, then open the matching app-exported PDF. The 0% tax entry is only an example input.

The 11.15 m² accessible brick wall area scope

Repoint visibly deteriorated mortar joints within 11.15 m² of accessible brick wall after a condition review. Include protection, joint preparation, compatible mortar allowance, placement, cleaning and cleanup. No structural rebuilding, water-intrusion diagnosis or high access.

This is an original fictional job set in Hobart, Tasmania. The location gives the example a recognisable setting; the rates are made-up inputs and do not describe local prices. Use the matching estimating guide to check what should be measured, selected or excluded on a real job.

Prepared by
Harbour & Gum Projects · fictional business
Prepared for
Alex Morgan · fictional customer
Example location
Hobart, Tasmania
Issued / valid through
25 September 2026 / 25 October 2026

Itemised brick joint repointing example

Each amount is its quantity multiplied by its AUD unit rate, rounded to cents. These 6 entries match the fixture used to make the PDF. Metric surface and length units describe the priced work, not a conversion rule for another property.

Brick joint repointing example — AUD
Work itemQuantityUnit rateAmount
Masonry condition and access review1 jobA$315.00A$315.00
Area protection1 jobA$196.00A$196.00
Joint preparation labour11.15 m²A$135.60A$1,511.94
Mortar material allowance1 jobA$378.00A$378.00
Repointing labour11.15 m²A$196.00A$2,185.40
Final cleaning and cleanup1 jobA$294.00A$294.00
Subtotal / example totalA$4,880.34

Calculation check: 11.15 m² × A$135.60 = A$1,511.94; 11.15 m² × A$196.00 = A$2,185.40. The demonstration tax field is 0%, so the displayed total stays A$4,880.34. Determine tax and markup for your own work instead of using this input as guidance.

Assumptions and scope boundaries

Loose units, movement or water damage may require work beyond mortar joints. Have the appropriate specialist confirm the wall is suitable for the proposed repair scope.

Outside this example: No structural rebuilding, brick replacement, waterproofing design, high scaffolding or concealed damage correction.

Selections, access or concealed conditions that differ from this scope require a revised quantity, allowance or separate line. The example deliberately separates them so the client can see what has and has not been priced.

Open the app-exported PDF

The PDF is a completed example exported from Estimates using this job data, fictional parties and the line amounts above. Read all pages to check notes as well as the total. The preview is the first page.

First page of the brick joint repointing estimate PDF

Adapt this example to your next job

  1. Replace the example location and project description with the actual site and client's requested result.
  2. Measure the work in the units shown, revising each quantity and product allowance to suit your plans and site inspection.
  3. Obtain your own supplier and labour inputs, then check access, protection, disposal and any specialist trade boundaries.
  4. Record exclusions and choices that remain open; review markup and tax for the actual quote.
  5. Preview every page of the PDF and check the item totals before sharing it.
  • Mark measured repair area.
  • Review brick and structural condition.
  • Confirm compatible mortar and finish.
  • Record access and cleaning constraints.

Common questions about brick joint repointing

Can all brick walls use one repointing price?

Joint density, access, condition and mortar selection vary. Measure and inspect the specific wall.

Does repointing stop every leak?

It should not be presented as a universal leak remedy. Identify and assess the water path separately.

FROM SCOPE TO PDF

Make your own brick joint repointing estimate.

Describe the actual job in Estimates on iPhone or Android, then review every quantity, rate and scope note. Add your business and client details, check the document and share an itemised PDF. Example amounts are fictional, and some app features may require an in-app purchase.

Plain-text version · Browse all samples

Less paperwork. More job done.

Your next estimate can start on site.

Download on the App StoreGet it on Google Play