EXAMPLE AT A GLANCE
This fictional Bunbury, Western Australia warehouse storage racking installation example contains 7 itemised costs totalling A$12,371.40. Its app-exported PDF uses the exact metric quantities and AUD rates in the table, with scope assumptions and exclusions explained below.
Project scope: Four freestanding rack bays
Install four selected storage-rack bays on a confirmed suitable warehouse slab with layout, anchoring and handoff inspection.
This original fictional example is set in Bunbury, Western Australia. Harbour & Gum Projects and Alex Morgan are made-up parties. The matching Australian guide explains which measurements, product decisions and site conditions turn this brief into a client-ready quote.
- Example location
- Bunbury, Western Australia
- Prepared by
- Harbour & Gum Projects · fictional business
- Prepared for
- Alex Morgan · fictional customer
- Issued / valid through
- 25 September 2026 / 25 October 2026
Itemised warehouse storage racking installation costs
These 7 AUD lines reproduce the native app export. Rack bay allowance is measured as 4 each; Anchor and guard allowance uses 4 set. Some lines are measured work while others are a product or site-task allowance. Read the unit before reusing the structure for a different job.
| Work item | Quantity | Unit rate | Amount |
|---|---|---|---|
| Layout and slab review allowance | 1 job | A$626.40 | A$626.40 |
| Rack bay allowance | 4 each | A$1,370.25 | A$5,481.00 |
| Anchor and guard allowance | 4 set | A$274.05 | A$1,096.20 |
| Material handling | 1 job | A$508.95 | A$508.95 |
| Rack assembly labour | 4 bay | A$704.70 | A$2,818.80 |
| Anchor fitting | 4 bay | A$339.30 | A$1,357.20 |
| Inspection and handoff | 1 job | A$482.85 | A$482.85 |
| Illustrative total | A$12,371.40 | ||
Product selection and installation should be clear from the descriptions. Confirm delivery, fixings, preparation, waste and any specialist trade responsibility for the actual job rather than assuming each allowance covers them.
Check the arithmetic
Rack bay allowance: 4 each × A$1,370.25 = A$5,481.00. Anchor and guard allowance: 4 set × A$274.05 = A$1,096.20. All other lines use the same quantity-by-rate calculation and sum to A$12,371.40. Every fixture line lands on an exact cent, so the native PDF subtotal equals the displayed table total.
Measurement to check: Measure aisle width, slab condition, bay dimensions and loading schedule. Selection to check: Separate rack components, anchors and protective accessories. The PDF uses a 0% tax input only to make its fictional arithmetic visible. Confirm the GST treatment that applies to the actual job and set your own markup before sharing a client quote.
Assumptions and exclusions
Confirm the manufacturer layout and slab suitability before drilling.
Outside this stated scope: No engineered design, fire-system alteration or forklift supply.
A slab deficiency or changed load requirement needs an engineered solution. A changed condition should lead to a newly measured quantity, revised allowance or separately agreed task. Keep the client informed of the changed figure before producing another PDF.
Open the app-exported PDF
The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines shown here. The image is the first-page preview. Open the complete PDF to check all entries; no rate is a current Bunbury, Western Australia market claim.
Adapt this example to a real job
- Write the actual work boundary and site address; use this measurement basis: Measure aisle width, slab condition, bay dimensions and loading schedule.
- Confirm products, access and handoff responsibilities; record this selection decision: Separate rack components, anchors and protective accessories.
- Replace all fictional product, labour and subcontractor rates with your own evidence.
- Review quantities, extensions, total, GST and markup settings, client details and validity date.
- Preview every PDF page and share the quote with the agreed exclusions.
- Measure aisle width, slab condition, bay dimensions and loading schedule.
- Separate rack components, anchors and protective accessories.
- Confirm the manufacturer layout and slab suitability before drilling.
- A slab deficiency or changed load requirement needs an engineered solution.
Read the paired estimating guide for the project-specific scope and work sequence.
Questions about this estimate
Which quantity controls this warehouse storage racking installation estimate?
Measure aisle width, slab condition, bay dimensions and loading schedule.
When should this warehouse storage racking installation quote be revised?
A slab deficiency or changed load requirement needs an engineered solution. No engineered design, fire-system alteration or forklift supply.
TURN THE SCOPE INTO AN ITEMISED PDF
Make your own warehouse storage racking installation estimate.
Describe the actual job in Estimates on iPhone or Android or use AI assistance to start a draft. Check every measurement, quantity, rate, allowance, client detail and note before exporting your PDF. Some app features may require an in-app purchase.
