EXAMPLE AT A GLANCE
This fictional Dartmouth, Nova Scotia garage door opener installation example has 6 itemized costs and a C$1,535.00 total before tax or markup. The PDF, quantities, unit rates and scope assumptions match the table below.
Use this completed garage door opener installation document to see how a specific job becomes a client-facing estimate. The project, business, customer and amounts are fictional. For the one existing-door opener replacement in Dartmouth, Nova Scotia, the example uses the measured trade units shown in its PDF. Residential jobs may mix square feet, linear feet, counts and supplier units; keep each line’s measurement basis visible. Confirm site access, product selections and existing conditions in person. Check any trade or municipal requirements for the actual location, and record changes before issuing a final price. The figures are fictional CAD inputs, not a local price survey.
Project scope: One existing-door opener replacement
Replace one opener on an existing suitable, balanced garage door. Include removal, selected opener allowance, rail and mounting allowance, installation labour, accessory setup, operating check and cleanup. No door spring, track or electrical-circuit repair.
- Example location
- Dartmouth, Nova Scotia
- Prepared by
- Cedar & Beam Builders · fictional business
- Prepared for
- Jordan Taylor · fictional client
- Issued / valid through
- September 25 / October 25, 2026
Measure this work on the actual property before using any quantity. The illustration separates supplied products or materials from installation where the selection could change. A client should be able to compare each line with the agreed work, the selected products and the limits recorded in the notes.
The 6 itemized costs in Canadian dollars
Every row below is taken from the corresponding app-exported PDF fixture. Multiply the quantity by the unit rate to check the amount. These rates were chosen for this fictional example; they are not advertised prices or current averages for Dartmouth, Nova Scotia.
| Work item | Quantity | Unit rate | Amount |
|---|---|---|---|
| Existing opener removal | 1 each | C$150.00 | C$150.00 |
| New opener allowance | 1 each | C$495.00 | C$495.00 |
| Mounting and rail allowance | 1 job | C$160.00 | C$160.00 |
| Opener installation labour | 1 each | C$460.00 | C$460.00 |
| Remote and wall-control setup | 1 job | C$130.00 | C$130.00 |
| Operation check and cleanup | 1 job | C$140.00 | C$140.00 |
| Subtotal / example total | C$1,535.00 | ||
Two calculation checks:
- Existing opener removal: 1 each × C$150.00 = C$150.00.
- New opener allowance: 1 each × C$495.00 = C$495.00.
The PDF shows a 0% tax entry, so the illustrated tax is C$0.00 and the total remains C$1,535.00. This only describes the example. Confirm the applicable tax treatment and any markup for the real job before issuing your estimate.
Assumptions that change the price
Confirm the product, accessories, power source and intended controls. An allowance should be replaced with the actual model before procurement.
This scope assumes a suitable existing door and track. A heavy or damaged door can require its own repair before a new opener is installed.
Remotes, wall controls and connected features may differ by model. State which accessories are supplied and what setup is included at handoff.
Outside this example: No garage door repair, spring or track replacement, new electrical outlet, network support or unlisted accessory purchase.
Confirm site access, product selections and existing conditions in person. Check any trade or municipal requirements for the actual location, and record changes before issuing a final price. An allowance is a stated placeholder, not a promise to cover all work discovered later. If a selected product, quantity or hidden condition changes, update the affected line and explain the revision before proceeding.
Download the actual app PDF
The linked PDF was exported from Estimates for this fictional Canadian project. It carries the project scope, customer, work items, quantities, CAD rates and subtotal used in this table, plus a short note on tax, markup and one key exclusion. The detailed exclusions above remain important when adapting the example. Preview every PDF page, including the final totals and note.
Use the structure for a real job
- Replace Dartmouth, Nova Scotia and the example scope with the actual site and customer details.
- Measure the work and confirm the product schedule with the client.
- Replace every fictional CAD rate with your own labour, supplier and subcontractor inputs.
- Check exclusions, approvals, tax, markup and the document’s validity period for the real project.
- Preview the final PDF and recheck the total before sharing.
- Confirm selected model and accessories.
- Inspect door balance and track condition.
- Verify suitable power and mounting.
- Define handoff and old-unit disposal.
Common questions
Can an opener be replaced without door inspection?
The door condition affects suitability. Check it before treating the opener replacement as a complete solution.
Are remotes included?
List the accessories supplied with the selected unit and any additional controls or setup separately.
For the planning steps behind this document, read the garage door opener installation estimating guide.
