EXAMPLE AT A GLANCE
This fictional Sheffield laminate floor installation project has 7 itemised lines and an illustrative £4,732.67 total. The app-exported PDF, first-page preview, measurement basis, scope boundaries and matching UK estimating guide let you inspect every quantity and rate.
What this example covers
This fictional job is set in Sheffield and concerns one open-plan room. Install a selected click-fit laminate floor in one open-plan room over a suitable level surface, including underlay and edge trim. The estimate is a bounded document: the customer should be able to compare the described work with its measured lines, product allowances and exclusions. The matching UK guide explains how to prepare those inputs.
- Prepared by
- Cedar & Beam Builders · fictional business
- Prepared for
- Jordan Taylor · fictional customer
- Example location
- Sheffield, UK
- Issued / valid through
- 25 September 2026 / 25 October 2026
Itemised laminate floor installation example
These 7 lines reproduce the app-exported PDF exactly. The largest is Laminate allowance at £1,661.52; this is one fictional component, not a typical price. Read each quantity with its unit: area, length, time, count and lump sum describe different work and must not be interchanged.
| Work item | Quantity | Unit rate | Amount |
|---|---|---|---|
| Room takeoff and protection | 1 lump sum | £104.00 | £104.00 |
| Minor substrate preparation | 44.6 sq m | £17.20 | £767.12 |
| Laminate allowance | 48.3 sq m | £34.40 | £1,661.52 |
| Underlay allowance | 44.6 sq m | £8.60 | £383.56 |
| Laminate fitting | 44.6 sq m | £34.45 | £1,536.47 |
| Doorway profiles | 2 each | £44.00 | £88.00 |
| Edge trim and clean-up | 1 lump sum | £192.00 | £192.00 |
| Illustrative total | £4,732.67 | ||
The table separates the named product or material allowances from labour and site tasks wherever the scope needs that distinction. Before replacing a rate, check whether the product allowance includes delivery, waste, fixings and the selected specification.
How the total is calculated
Minor substrate preparation is 44.6 sq m × £17.20 = £767.12. Laminate allowance is 48.3 sq m × £34.40 = £1,661.52. The other lines follow the same calculation and sum to £4,732.67. Each fixture line lands on an exact penny, so the native PDF total equals the sum of the displayed line amounts.
Measurement to check: Measure the room shape, doorway returns and board direction; derive carton count from the chosen product. Selection to check: Distinguish selected laminate, moisture-compatible underlay and thresholds. The 0% tax field and zero markup are example document inputs, not an instruction for a live quote. Decide the correct settings for your own business and job.
Assumptions and exclusions
Check substrate flatness and expansion space before laying the first run.
Outside this stated scope: No subfloor repair, kitchen unit removal or stair covering.
A floor outside product flatness tolerance needs a separate levelling scope. A changed condition should lead to a newly measured quantity, explicit revised allowance or separately agreed task. Keep the customer informed of which figure changed and why before producing another PDF.
Download the app PDF
The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines above. Its first page appears below. Download the complete PDF to inspect every entry and its presentation; no listed rate is a current Sheffield market claim.
Make an estimate for your own job
- Write the actual work boundary and exclusions. Use this measurement basis: Measure the room shape, doorway returns and board direction; derive carton count from the chosen product.
- Confirm the selected products and access conditions. Record this selection decision: Distinguish selected laminate, moisture-compatible underlay and thresholds.
- Replace every fictional product, labour and subcontractor rate with your own evidence.
- Check line extensions, total, tax and markup settings, customer details and validity date.
- Preview every PDF page before sharing the estimate with the customer.
- Measure the room shape, doorway returns and board direction; derive carton count from the chosen product.
- Distinguish selected laminate, moisture-compatible underlay and thresholds.
- Check substrate flatness and expansion space before laying the first run.
- A floor outside product flatness tolerance needs a separate levelling scope.
Read the matching estimating guide for the project-specific measurement and work sequence.
Questions about this job
Which quantity controls this laminate floor installation estimate?
Measure the room shape, doorway returns and board direction; derive carton count from the chosen product.
When should this laminate floor installation quote be revised?
A floor outside product flatness tolerance needs a separate levelling scope. No subfloor repair, kitchen unit removal or stair covering.
MAKE THE EXAMPLE YOUR OWN
Build a laminate floor installation estimate
Use Estimates on iPhone or Android to enter your measured scope and line items. Review the result carefully and export a PDF for the actual job.
