EXAMPLE AT A GLANCE
This fictional Edinburgh accessible water pipe leak repair project has 7 itemised lines and an illustrative £1,032.00 total. The app-exported PDF, first-page preview, measurement basis, scope boundaries and matching UK estimating guide let you inspect every quantity and rate.
What this example covers
This fictional job is set in Edinburgh and concerns one visible supply-pipe leak. Repair one identified accessible water-supply pipe leak and check the joint under normal operation, with a defined opening and reinstatement allowance. The estimate is a bounded document: the customer should be able to compare the described work with its measured lines, product allowances and exclusions. The matching UK guide explains how to prepare those inputs.
- Prepared by
- Cedar & Beam Builders · fictional business
- Prepared for
- Jordan Taylor · fictional customer
- Example location
- Edinburgh, UK
- Issued / valid through
- 25 September 2026 / 25 October 2026
Itemised accessible water pipe leak repair example
These 7 lines reproduce the app-exported PDF exactly. The largest is Repair labour at £304.00; this is one fictional component, not a typical price. Read each quantity with its unit: area, length, time, count and lump sum describe different work and must not be interchanged.
| Work item | Quantity | Unit rate | Amount |
|---|---|---|---|
| Leak and isolation check | 1 lump sum | £116.00 | £116.00 |
| Local access opening | 1 lump sum | £144.00 | £144.00 |
| Pipe and fitting allowance | 1 lump sum | £108.00 | £108.00 |
| Repair labour | 4 hours | £76.00 | £304.00 |
| Pressure and leak check | 1 lump sum | £120.00 | £120.00 |
| Access closure allowance | 1 lump sum | £176.00 | £176.00 |
| Clean-up and handoff | 1 lump sum | £64.00 | £64.00 |
| Illustrative total | £1,032.00 | ||
The table separates the named product or material allowances from labour and site tasks wherever the scope needs that distinction. Before replacing a rate, check whether the product allowance includes delivery, waste, fixings and the selected specification.
How the total is calculated
Repair labour is 4 hours × £76.00 = £304.00. Local access opening is 1 lump sum × £144.00 = £144.00. The other lines follow the same calculation and sum to £1,032.00. Each fixture line lands on an exact penny, so the native PDF total equals the sum of the displayed line amounts.
Measurement to check: Record pipe material, diameter, leak location and access dimensions; distinguish visible from concealed sections. Selection to check: Choose compatible repair fittings after identifying the pipe and isolate finish repair as a separate line. The 0% tax field and zero markup are example document inputs, not an instruction for a live quote. Decide the correct settings for your own business and job.
Assumptions and exclusions
Shut off water, expose the joint, repair and test before closing access.
Outside this stated scope: No whole-house repiping, water-damage restoration or hidden leak tracing.
Multiple leaks or corrosion extending beyond the opening trigger a new scope. A changed condition should lead to a newly measured quantity, explicit revised allowance or separately agreed task. Keep the customer informed of which figure changed and why before producing another PDF.
Download the app PDF
The document was exported from Estimates using the fictional business, client, dates, short PDF scope, notes and cost lines above. Its first page appears below. Download the complete PDF to inspect every entry and its presentation; no listed rate is a current Edinburgh market claim.
Make an estimate for your own job
- Write the actual work boundary and exclusions. Use this measurement basis: Record pipe material, diameter, leak location and access dimensions; distinguish visible from concealed sections.
- Confirm the selected products and access conditions. Record this selection decision: Choose compatible repair fittings after identifying the pipe and isolate finish repair as a separate line.
- Replace every fictional product, labour and subcontractor rate with your own evidence.
- Check line extensions, total, tax and markup settings, customer details and validity date.
- Preview every PDF page before sharing the estimate with the customer.
- Record pipe material, diameter, leak location and access dimensions; distinguish visible from concealed sections.
- Choose compatible repair fittings after identifying the pipe and isolate finish repair as a separate line.
- Shut off water, expose the joint, repair and test before closing access.
- Multiple leaks or corrosion extending beyond the opening trigger a new scope.
Read the matching estimating guide for the project-specific measurement and work sequence.
Questions about this job
Which quantity controls this accessible water pipe leak repair estimate?
Record pipe material, diameter, leak location and access dimensions; distinguish visible from concealed sections.
When should this accessible water pipe leak repair quote be revised?
Multiple leaks or corrosion extending beyond the opening trigger a new scope. No whole-house repiping, water-damage restoration or hidden leak tracing.
MAKE THE EXAMPLE YOUR OWN
Build an accessible water pipe leak repair estimate
Use Estimates on iPhone or Android to enter your measured scope and line items. Review the result carefully and export a PDF for the actual job.
