EXAMPLE AT A GLANCE
A new exterior cladding installation example for one detached outbuilding wall contains 7 itemized lines totaling $11,100.00 before tax or markup. The actual app PDF, measurement basis, project boundaries and a matching how-to guide are available here; every rate is fictional.
What this example covers
Fit selected exterior cladding to a prepared outbuilding wall with battens, weather layer, trims and fixings.
Use this example to see a complete document for one detached outbuilding wall. The brief is tied to Pittsburgh, Pennsylvania for a plausible project setting; the amounts are fictional input values and do not represent local market prices. The estimating guide explains the decisions behind these lines.
- Prepared by
- Cedar & Beam Builders · fictional business
- Prepared for
- Jordan Taylor · fictional customer
- Example project
- One detached outbuilding wall
- Issued / valid through
- September 25, 2026 / October 25, 2026
Itemized new exterior cladding installation example
These are the same quantities and unit prices used by the downloadable app PDF. A cost line can represent measured work, a selected product allowance or a distinct site task. Check which interpretation applies before replacing any amount.
| Work item | Quantity | Unit price | Amount |
|---|---|---|---|
| Wall survey and access | 1 job | $320.00 | $320.00 |
| Weather layer allowance | 380 sq. ft. | $2.00 | $760.00 |
| Batten and fixing allowance | 1 job | $540.00 | $540.00 |
| Cladding material allowance | 410 sq. ft. | $9.00 | $3,690.00 |
| Cladding fitting | 380 sq. ft. | $10.00 | $3,800.00 |
| Corners and opening trim | 95 linear ft. | $18.00 | $1,710.00 |
| Final seal and cleanup | 1 job | $280.00 | $280.00 |
| Subtotal / example total | $11,100.00 | ||
How the subtotal is calculated
The example line for weather layer allowance is 380 sq. ft. × $2.00 = $760.00. This line is one part of the complete 7-item estimate and uses a fictional unit rate.
The document sums the rounded line amounts to $11,100.00. Tax and markup are not included; a zero tax field in a sample document does not mean a real project is tax-exempt. Confirm the actual treatment for the job you are quoting.
Measurement to verify: Measure net wall area, openings, corners and trim length; state the existing wall build-up. Selection to verify: Separate cladding boards, weather layer and trim allowances.
Assumptions and exclusions
Check substrate and moisture detailing before fixing battens and boards.
Outside the stated scope: No wall framing, insulation retrofit or structural repair.
Unsound sheathing or missing flashings require additional envelope work. If the scope changes after a client reviews the estimate, update the relevant quantities, allowances and written exclusions before sharing a revised PDF.
Download the actual app PDF
The downloadable document was exported from Estimates using the fictional business, client, scope and cost lines shown above. The preview is its first page. Review the full PDF before using its layout or wording as a reference for your own estimate.
Build your own version
- Write the actual job boundary and measured quantities. Measurement basis to check: Measure net wall area, openings, corners and trim length; state the existing wall build-up.
- Confirm products, access and handoff responsibilities. Selection decision to record: Separate cladding boards, weather layer and trim allowances.
- Replace every fictional rate with your own supplier, labor and subcontractor inputs.
- Add business and client details, set the appropriate tax and markup, then preview all PDF pages.
- Share the estimate with its exclusions and a clear validity date.
- Measure net wall area, openings, corners and trim length; state the existing wall build-up.
- Separate cladding boards, weather layer and trim allowances.
- Check substrate and moisture detailing before fixing battens and boards.
- Unsound sheathing or missing flashings require additional envelope work.
Questions about this estimate
Which quantity controls this new exterior cladding installation estimate?
Measure net wall area, openings, corners and trim length; state the existing wall build-up.
When should this new exterior cladding installation quote be revised?
Unsound sheathing or missing flashings require additional envelope work. No wall framing, insulation retrofit or structural repair.
TURN THIS EXAMPLE INTO YOUR OWN ESTIMATE
Build a new exterior cladding installation estimate for your project
Use Estimates on iPhone or Android to draft a scope with AI assistance or enter each line yourself. Review quantities, rates, exclusions, and client details before exporting a PDF. The example is free to inspect; some app features may require an in-app purchase.
