EXAMPLE AT A GLANCE
This fictional roof repair quote for Wollongong, New South Wales has 7 itemised lines totalling A$1,817.42. Review the exact metric quantities and scope, then open the matching app-exported PDF. The 0% tax entry is only an example input.
The localised roof tile repair scope
Price a localised 9.29 m² roof tile repair area after inspection. Include access/setup allowance, removal of affected roof tiles, replacement roof tile and underlay allowances, one scoped flashing repair, installation and disposal. No whole-roof replacement.
This is an original fictional job set in Wollongong, New South Wales. The location gives the example a recognisable setting; the rates are made-up inputs and do not describe local prices. Use the matching estimating guide to check what should be measured, selected or excluded on a real job.
- Prepared by
- Harbour & Gum Projects · fictional business
- Prepared for
- Alex Morgan · fictional customer
- Example location
- Wollongong, New South Wales
- Issued / valid through
- 25 September 2026 / 25 October 2026
Itemised roof repair example
Each amount is its quantity multiplied by its AUD unit rate, rounded to cents. These 7 entries match the fixture used to make the PDF. Metric surface and length units describe the priced work, not a conversion rule for another property.
| Work item | Quantity | Unit rate | Amount |
|---|---|---|---|
| Access and setup allowance | 1 job | A$350.00 | A$350.00 |
| Affected roof tile removal | 9.29 m² | A$23.00 | A$213.67 |
| Replacement roof tiles allowance | 11.15 m² | A$21.20 | A$236.38 |
| Underlay and fasteners | 1 job | A$133.00 | A$133.00 |
| Scoped flashing repair allowance | 1 job | A$252.00 | A$252.00 |
| Repair installation labour | 9.29 m² | A$53.00 | A$492.37 |
| Debris removal | 1 job | A$140.00 | A$140.00 |
| Subtotal / example total | A$1,817.42 | ||
Calculation check: 9.29 m² × A$23.00 = A$213.67; 11.15 m² × A$21.20 = A$236.38. The demonstration tax field is 0%, so the displayed total stays A$1,817.42. Determine tax and markup for your own work instead of using this input as guidance.
Assumptions and scope boundaries
The inspected repair area is 9.29 m², while the replacement roof tile allowance is 11.15 m². The 1.86 m² difference is a fictional purchasing allowance for cuts and product matching; verify it against the selected tile and the roof condition.
Outside this example: No whole-roof replacement, decking replacement, structural repairs, hazardous-material handling or guarantee of conditions outside the inspected repair scope.
Selections, access or concealed conditions that differ from this scope require a revised quantity, allowance or separate line. The example deliberately separates them so the client can see what has and has not been priced.
Open the app-exported PDF
The PDF is a completed example exported from Estimates using this job data, fictional parties and the line amounts above. Read all pages to check notes as well as the total. The preview is the first page.
Adapt this example to your next job
- Replace the example location and project description with the actual site and client's requested result.
- Measure the work in the units shown, revising each quantity and product allowance to suit your plans and site inspection.
- Obtain your own supplier and labour inputs, then check access, protection, disposal and any specialist trade boundaries.
- Record exclusions and choices that remain open; review markup and tax for the actual quote.
- Preview every page of the PDF and check the item totals before sharing it.
- Identify the inspected repair area.
- Specify product and appearance assumptions.
- Name the included flashing task.
- Explain how concealed damage changes the estimate.
Common questions about roof repair
Why are the tile and repair areas different?
The quote separately measures 9.29 m² of work and 11.15 m² of replacement tiles. Confirm the purchasing quantity once the product and repair edges are known.
Can a small roof repair include batten replacement?
Include it only when assessed and quantified, or list it as a separate allowance. Do not imply unknown batten damage is covered by a surface repair price.
FROM SCOPE TO PDF
Make your own roof repair estimate.
Describe the actual job in Estimates on iPhone or Android, then review every quantity, rate and scope note. Add your business and client details, check the document and share an itemised PDF. Example amounts are fictional, and some app features may require an in-app purchase.
