EXAMPLE AT A GLANCE
This Leicester example prices 42.7 metres gutter replacement with 7 itemised lines and a £1,336.20 illustrative total. It uses fictional prices, a 0% tax input and no markup; verify all inputs for an actual job.
A defined guttering replacement job
This fictional project is located in Leicester. Replace 42.7 metres of accessible guttering and 9.8 metres of downpipes on a single-storey home. Include removal, material allowances, installation, four gutter outlets and clean-up. Existing fascia is assumed suitable. The written scope is the boundary of the example: a customer should be able to match each planned task to a line in the document, and see where a product choice or hidden condition still needs checking.
- Prepared by
- Cedar & Beam Builders · fictional business
- Prepared for
- Jordan Taylor · fictional customer
- Example location
- Leicester, UK
- Issued / valid through
- 25 September 2026 / 25 October 2026
Read every amount in pounds
The table reproduces the fixture sent to the app exporter. Each amount is its quantity multiplied by the shown unit rate, rounded to pence. The largest line is Gutter material allowance at £448.35; that is a part of the total, not a standard price for work of this kind. Check the unit, quantity and scope together before comparing lines with a real supplier or subcontractor quote.
| Work item | Quantity | Unit rate | Amount |
|---|---|---|---|
| Existing gutter removal | 42.7 metres | £3.30 | £140.91 |
| Gutter material allowance | 42.7 metres | £10.50 | £448.35 |
| Downpipe material allowance | 9.8 metres | £7.90 | £77.42 |
| Gutter installation labour | 42.7 metres | £9.20 | £392.84 |
| Downpipe installation labour | 9.8 metres | £6.60 | £64.68 |
| Gutter outlets and connection hardware | 4 sets | £28.00 | £112.00 |
| Disposal and clean-up | 1 lump sum | £100.00 | £100.00 |
| Subtotal / example total | £1,336.20 | ||
For a quick cross-check, existing gutter removal is 42.7 metres × £3.30 = £140.91, and gutter material allowance is 42.7 metres × £10.50 = £448.35. The sum of all 7 line amounts is £1,336.20. The PDF's 0% tax input and zero markup are example settings; determine the correct inputs for your own work.
What this example assumes
New gutters depend on the condition of the supporting surface. This example assumes suitable fascia. If repairs are visible or likely, inspect and price them separately rather than allowing a replacement gutter line to imply carpentry work.
Work outside the example: No fascia replacement, multi-storey access, underground drainage, gutter guards or drainage-system design.
The quantity basis matters. Where a product allowance differs from an installation quantity, the difference reflects this fictional layout or purchase plan and must be checked against the selected product. Existing conditions, safe access and any necessary approvals remain project decisions. Agree how changed measurements or discoveries will be recorded and priced before extra work begins.
View the app-exported PDF
The PDF was generated from this fictional project, with the exact line items, dates, customer and business details stated here. It is a completed example document for learning how an itemised estimate reads. Its prices are illustrative and are not current Leicester market rates.
Build an estimate for your own job
Start with a measured site record and the customer's selected finish or equipment. Replace all fictional quantities and rates, assign responsibility for supply and waste removal, and check that the exclusions describe the actual boundary. Review each extended amount, total and note in the PDF before sharing it.
- Count runs, corners, gutter outlets and downpipes.
- Inspect the fascia assumption.
- State where discharge work ends.
- Separate optional accessories and drainage connections.
Read the matching guttering replacement estimating guide for the measurement and scope decisions behind the example.
Common questions
Should downpipes be included in gutter length?
Measure and label them separately. Horizontal gutter runs and vertical downpipes have different quantities and may have different material and labour rates.
Are gutter guards included automatically?
No. List them as included work or a separate option, with the selected product and quantity.
