EXAMPLE AT A GLANCE
A bathroom vanity replacement example for one existing vanity position contains 7 itemized lines totaling $1,715.00 before tax or markup. The actual app PDF, measurement basis, project boundaries and a matching how-to guide are available here; every rate is fictional.
What this example covers
Remove a single existing vanity, install a selected replacement in the same position, reconnect the existing services and finish exposed wall edges.
Use this example to see a complete document for one existing vanity position. The brief is tied to Charlotte, North Carolina for a plausible project setting; the amounts are fictional input values and do not represent local market prices. The estimating guide explains the decisions behind these lines.
- Prepared by
- Cedar & Beam Builders · fictional business
- Prepared for
- Jordan Taylor · fictional customer
- Example project
- One existing vanity position
- Issued / valid through
- September 25, 2026 / October 25, 2026
Itemized bathroom vanity replacement example
These are the same quantities and unit prices used by the downloadable app PDF. A cost line can represent measured work, a selected product allowance or a distinct site task. Check which interpretation applies before replacing any amount.
| Work item | Quantity | Unit price | Amount |
|---|---|---|---|
| Site measure and protection | 1 job | $95.00 | $95.00 |
| Existing vanity removal | 1 each | $145.00 | $145.00 |
| Vanity and top allowance | 1 each | $690.00 | $690.00 |
| Faucet and waste parts allowance | 1 set | $210.00 | $210.00 |
| Set and secure vanity | 1 each | $280.00 | $280.00 |
| Reconnect and leak check | 1 job | $175.00 | $175.00 |
| Wall touch-up and disposal | 1 job | $120.00 | $120.00 |
| Subtotal / example total | $1,715.00 | ||
How the subtotal is calculated
The example line for site measure and protection is 1 job × $95.00 = $95.00. This line is one part of the complete 7-item estimate and uses a fictional unit rate.
The document sums the rounded line amounts to $1,715.00. Tax and markup are not included; a zero tax field in a sample document does not mean a real project is tax-exempt. Confirm the actual treatment for the job you are quoting.
Measurement to verify: Measure cabinet width, depth, pipe entry points and floor clearance rather than relying on the old unit label. Selection to verify: Separate the cabinet and top allowance from faucet fixtures, connection parts and installation labor.
Assumptions and exclusions
Confirm product delivery and shutoff access before removing the existing unit.
Outside the stated scope: No plumbing relocation, new floor covering or concealed water-damage repair.
Unexpected pipe position or damaged wall behind the cabinet requires a revised connection or finish line. If the scope changes after a client reviews the estimate, update the relevant quantities, allowances and written exclusions before sharing a revised PDF.
Download the actual app PDF
The downloadable document was exported from Estimates using the fictional business, client, scope and cost lines shown above. The preview is its first page. Review the full PDF before using its layout or wording as a reference for your own estimate.
Build your own version
- Write the actual job boundary and measured quantities. Measurement basis to check: Measure cabinet width, depth, pipe entry points and floor clearance rather than relying on the old unit label.
- Confirm products, access and handoff responsibilities. Selection decision to record: Separate the cabinet and top allowance from faucet fixtures, connection parts and installation labor.
- Replace every fictional rate with your own supplier, labor and subcontractor inputs.
- Add business and client details, set the appropriate tax and markup, then preview all PDF pages.
- Share the estimate with its exclusions and a clear validity date.
- Measure cabinet width, depth, pipe entry points and floor clearance rather than relying on the old unit label.
- Separate the cabinet and top allowance from faucet fixtures, connection parts and installation labor.
- Confirm product delivery and shutoff access before removing the existing unit.
- Unexpected pipe position or damaged wall behind the cabinet requires a revised connection or finish line.
Questions about this estimate
Which quantity controls this bathroom vanity replacement estimate?
Measure cabinet width, depth, pipe entry points and floor clearance rather than relying on the old unit label.
When should this bathroom vanity replacement quote be revised?
Unexpected pipe position or damaged wall behind the cabinet requires a revised connection or finish line. No plumbing relocation, new floor covering or concealed water-damage repair.
TURN THIS EXAMPLE INTO YOUR OWN ESTIMATE
Build a bathroom vanity replacement estimate for your project
Use Estimates on iPhone or Android to draft a scope with AI assistance or enter each line yourself. Review quantities, rates, exclusions, and client details before exporting a PDF. The example is free to inspect; some app features may require an in-app purchase.
